Como iniciar la sesión en Windows10

SkyJxse
SkyJxse Member Posts: 7

Tinkerer

edited August 2023 in 2018 Archives
Hola, quise restablecer de fábrica mi ES1-432 y cuando me inicio me pide que ingrese "otro usuario", hago esto pero no me funciona. ¿Alguna solución?.

Answers

  • JackE
    JackE ACE Posts: 44,478 Trailblazer
    Mantenga presionado el botón de encendido hasta que la máquina se apague por completo. Luego vuelva a encenderlo e inmediatamente presione y mantenga presionada la tecla ALT mientras toca la tecla F10. Luego siga las instrucciones en la pantalla de recuperación que aparece como en el video para reiniciar la máquina a un estado nuevo de fábrica. Jack E/NJ

    Press and hold power button till machine completely shuts off. Then turn it back on again and immediately press and hold the ALT key while tapping the F10 key. Then follow directions in the recovery screen that appears as in the video to reset the machine to a factory-fresh state. Jack E/NJ

    https://www.youtube.com/watch?v=cpzLJRAZldA




    Jack E/NJ

  • SkyJxse
    SkyJxse Member Posts: 7

    Tinkerer

    Que tal, muchas gracias por su ayuda. Pero aún mi problema no se ha solucionado, me sigue pidiendo una cuenta y pongo la de "Administrador", y me dice que esta deshabilitada. 
    Thank u.
  • JackE
    JackE ACE Posts: 44,478 Trailblazer
    ¿Puedes ingresar al BIOS tocando inmediatamente la tecla F2 después de encender la máquina? Jack E/NJ

    Can you enter the BIOS by immediately tapping the F2 key after turning the machine on? Jack E/NJ



    Jack E/NJ