The camera on my Acer Switch 10 shows just a black screen.

13»

Answers

  • PetrP
    PetrP Member Posts: 7 New User
    Biiig Thx, after the successful IObit Driver Booster 8 Free download, installation and driver analysis, the last thing I saw on the display was a FW attempt to update the graphics driver, then just a black screen with flashing backlight LEDs ... now I can't even SWITCH start ... any idea?
  • JackE
    JackE ACE Posts: 44,898 Trailblazer
    Just press and hold the power button till the machine shuts off. About 5 seconds. Remove the charger. Press and hold a paperclip into the battery reset pinhole for about 30 seconds. Plug the charger  back in. Try to turn it on again. Jack E/NJ

    Jack E/NJ

  • PetrP
    PetrP Member Posts: 7 New User
    JackE said:
    Just press and hold the power button till the machine shuts off. About 5 seconds. Remove the charger. Press and hold a paperclip into the battery reset pinhole for about 30 seconds. Plug the charger  back in. Try to turn it on again. Jack E/NJ
    Only small pinhole on my piece is microphone ....
  • JackE
    JackE ACE Posts: 44,898 Trailblazer
    What's your full SW10 model number? Example, SW5-012. Jack E/NJ

    Jack E/NJ

  • JackE
    JackE ACE Posts: 44,898 Trailblazer
    Sorry, that's a serial number from which i can't determine the model number. There are dozens of switch 10 models.  Jack E/NJ

    Jack E/NJ

  • PetrP
    PetrP Member Posts: 7 New User
    Should be SW5-012 ...
  • JackE
    JackE ACE Posts: 44,898 Trailblazer
    Can you access and see a BIOS menu with F2 on turning the machine on? Jack E/NJ

    Jack E/NJ