Aspire VX5-591G: Bios does not save boot order

Wanderer1976
Wanderer1976 Member Posts: 2 New User
edited August 2023 in 2018 Archives
Hello.
I am a very happy owner of an Aspire VX5-591G. I am working on it as a dual boot machine (Debian & Windows 10 installed on the Intel SSD) for a long time now without any problems. Yesterday i updated the bios to version 1.06 (latest bios for this laptop model) and since then i cannot make it to boot permanently from the SSD through the bios boot order option. The boot was and is in legacy mode. Every time i start up the laptop i have to press F12 and select as boot device the SSD hard disk. Any ideas of how to make it remember the boot order? Thank you very much.

Best Answer

  • Sharanji
    Sharanji ACE Posts: 4,328 Pathfinder
    edited May 2018 Answer ✓
    Wanderer1976

    Try to reset BIOS to default settings. Start your computer and as soon as you hit the Power On button, keep pressing the F2 key. You can simply hit the F9 key to display a blue screen that says Load Setup defaults? Clicking on Yes will restore the default BIOS settings.  Press F10 to save and exit.

    Now go to BIOS and check if you are able to set the boot order.

    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

Answers

  • Sharanji
    Sharanji ACE Posts: 4,328 Pathfinder
    edited May 2018 Answer ✓
    Wanderer1976

    Try to reset BIOS to default settings. Start your computer and as soon as you hit the Power On button, keep pressing the F2 key. You can simply hit the F9 key to display a blue screen that says Load Setup defaults? Clicking on Yes will restore the default BIOS settings.  Press F10 to save and exit.

    Now go to BIOS and check if you are able to set the boot order.

    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!
  • JackE
    JackE ACE Posts: 45,201 Trailblazer
    It would've been a lot easier to have originally installed Debian in UEFI mode alongside the original UEFI mode factory Win10 with a GPT partitioned Debian installation stick on a GPT SSD. Jack E/NJ 

    Jack E/NJ

  • Wanderer1976
    Wanderer1976 Member Posts: 2 New User
    edited May 2018
    Sharanji said:
    Wanderer1976

    Try to reset BIOS to default settings. Start your computer and as soon as you hit the Power On button, keep pressing the F2 key. You can simply hit the F9 key to display a blue screen that says Load Setup defaults? Clicking on Yes will restore the default BIOS settings.  Press F10 to save and exit.

    Now go to BIOS and check if you are able to set the boot order.

    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!
    Hello Sharanji. Thank you very much for your reply. I did exactly what you said and it finally worked. Have a nice day...