XF270HUA - green tinst and dark shadows

Options
xerces8
xerces8 Member Posts: 7

Tinkerer

edited November 2017 in Monitors
Hi!

On my XF270HUA I see green tint when viewing patterns 1, 2a and 2b on this page: lagom lcd-test inversion (pixelwalk) - the forum does not allow me to post links
The others are OK (grey).

Also, there is a dark shadow on grey areas left and right of the black info box in the page.

See Photo: apparently I can not include images either

It happens with different cables (DVI, HDMI) and computers.

Should I return it for an exchange?

Regards,
David

Answers

  • xerces8
    xerces8 Member Posts: 7

    Tinkerer

    Options
    The photo is on imgur, under code ERFBSvA (JPG)

    I will make a proper link later, when the forum allows it.
  • xerces8
    xerces8 Member Posts: 7

    Tinkerer

    Options
    If I set contrast to 62 or more, then the problem disappears.
    Or if I set gamma to 1.8.

    Seems like a firmware bug.
  • xerces8
    xerces8 Member Posts: 7

    Tinkerer

    Options
    With those settings, pattern 7b is purple (only when in full screen - F11 key)
  • xerces8
    xerces8 Member Posts: 7

    Tinkerer

    Options
    With those settings, pattern 7b is purple (only when in full screen - F11 key)
    xerces8 said:
    The photo is on imgur, under code ERFBSvA (JPG)

    I will make a proper link later, when the forum allows it.

    Here is the link: https://imgur.com/ERFBSvA
  • xerces8
    xerces8 Member Posts: 7

    Tinkerer

    Options
    The problem still persists.

    I had the monitor "repaired", then I purchased another of the same type. Seems like a "serial" defect.