Acer AXC600-EB2C x16 slot for graphics card only?

RandyN
RandyN Member Posts: 1 New User
edited March 2023 in 2017 Archives
Hello everyone,

My first visit to your community. =) I have repurposed my Acer AXC600-EB2C to a file server running nas4free. I am attempting to add an LSI SAS 9211-8i card to the machine and I have run into an error during the setup. Looking into the error I need to eliminate a couple of potential causes.

1) Is the PCI-e Gen 3 x16 slot capable of running a card other than a graphics card?
2) If so can it handle a Gen 2 x8 card?

Thank you for any advice you may be able to provide.

Randy

Comments

  • JordanB
    JordanB ACE Posts: 3,729 Pathfinder
    Randy,

    i don't know the answer to your questions.  But a couple of people on this forum have gone in to their BIOS settings and toggled the "Quiet Boot" setting on certain models from circa 2012-2013 to get some PCIe devices working.    I'm not even 100 percent sure your model has a quiet boot setting.   Proceed at own risk.   Good luck and hopefully someone can answer your questions. 
    I'm not an Acer employee.
  • JordanB
    JordanB ACE Posts: 3,729 Pathfinder
    If the computer boots and loads the OS, then quiet boot isn't the problem.  You should also post the error message (screenshot or photo).  
    I'm not an Acer employee.