Acer One 10 Not Recovered

rubynorth
rubynorth Member Posts: 1 New User
edited March 2023 in 2017 Archives
Good evening! I have been trouble shooting my Acer One 10 tablet laptop for month and had even sent it into technician to solve the Preparing Repair mode or the Startup Repair mode. Luckily the technician was able to let it functioned again but some specs like sounds, wifi connection, bluetooth and sd card drive are disabled so I can somehow use it as laptop but again all those specs mentioned are disabled. The technician have even told me that the system was crashed and I don'teven have the recovery from where my said tablaptop has been bought..My husband has bought it from other country so there is no recovery whatsoever is given to somehow recover it if ever thing like this may happen,.
Can I somehow have my Acer One 10 tablaptop back its original specs?..Please help me! Thanks!

Answers

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    1) download a windows 10 iso using Microsof tool:
    select the proper windows 10 version (the same installed on your laptop) and choose to save it as iso file when prompted
    2) download Rufus:
    plug your USB flash drive, run Rufus then:
    select ISO image from the dropdown menu near "Create a bootable disk"
    click on the little icon on the right and browse to the windows 10 downloaded iso file
    as  Partitions scheme select "GPT partition scheme for UEFI"
    as File system select "FAT32"
    click on Start
    wait until it finish, then uplug your USB flash drive
    3) backup all your personal data
    4) Reboot to BIOS, pressing F2 at boot, then press F9 to load default and F10 to save and exit
    5) plug your USB flash drive and at boot press F12 (if F12 doesn't work, see if it auto-recognise the USB flash drive or press F2 to enter BIOS and enable F12 boot menu under BOOT tab), choose the USB flash drive as bootable device
    6) once at language/keyboard selection, press shift+F10, a command prompt will open
    7) type
    Diskpart
    list disk
    select disk x (x is the number of your HDD)
    clean
    exit
    exit again to close command prompt
    8) proceed with windows 10 installation

    if you need any driver or Acer software, you can download it from here:
    https://www.acer.com/ac/en/US/content/support
    I'm not an Acer employee.