P7200i wil not start via remote control any more

vdrHorstvdrHorst Member Posts: 1

We have 2 identical Acer P7200i beamers in our school, working ok once they are powered on. Remote control is working ok then also, on all functions. (Battery has been replaced just in case)
However, when the beamers are in standby e.g.
red led showing (either by cold-start, power off on device or power off on remote), it cannot be powered ON through the remote any more, only on the device itself.
Previously this worked, and most logical should also work, as the beamer is mounted on a ceiling.
Does anyone have any clue in which direction I should search/inverstigate?
(Btw, already did several device resets using the hidden switch near the LAN connector)
Greetings,
vdrHorst, NL

 

[edited for privacy - THIS IS A PUBLIC FORUM - please do not post personal or unique information such as but not limited to full names, email addresses, phone numbers, full serial numbers, etc.]

Sign In or Register to comment.

Who's Online671

Acer-Monica
Acer-Monica
aspiration67
aspiration67
banjovan1029
banjovan1029
brummyfan2
brummyfan2
Cerberus97
Cerberus97
Cvetan
Cvetan
David20711
David20711
IVAN_PC
IVAN_PC
Kno63
Kno63
koubi
koubi
MEMO123
MEMO123
milpredo
milpredo
Muhil
Muhil
peppemassa
peppemassa
rubismiths
rubismiths
smu8ajt
smu8ajt
Tokyo01
Tokyo01
+654 Guests

Join in, share your experience!

It looks like you're new here. Sign in or register to get started.

Assistance by Acer


Drivers &
Manuals

Acer
Answers