Usable Memory - Only 1.4GB RAM recognized of 6GB - Acer Aspire V5-122P after 4GB DDR3L upgrade

cuguys
cuguys Member Posts: 5 New User
edited March 2023 in 2017 Archives

Answers

  • ven98
    ven98 ACE Posts: 4,073 Pathfinder
    Is the 4GB RAM recognised by BIOS?
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • cuguys
    cuguys Member Posts: 5 New User

    Hi:

    Shows up in via Task Mngr Performance Memory as 6.0GB DDR3 but only 1.4MB memory usage with 4.6GB Hardware reserved. 

     

    Stick is 

    QUMOX 4GB 1600 DDR3 4 GB PC3-12800 SO-DIMM PC3 RAM Laptop Memory 204pin CL11

  • cuguys
    cuguys Member Posts: 5 New User

    Also accessing BIOS via F2 does not offer Advanced in Menu.

     

    via msconfig: Boot Advanced Option Max Memory is unticked and thus 0

  • ven98
    ven98 ACE Posts: 4,073 Pathfinder
    Have you tried connecting the 4GB RAM stick only and see if your system will boot?
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • cuguys
    cuguys Member Posts: 5 New User

    Suspect the other channel's 2GB memory is soldered in, as it is not visible, and thus presumably not removable. Certainly every time I refit the removable 2GB stick which made up the original spec of 4GB, the laptop boots up, but of course system is slow. But not a slow when the 4GB is installed.

  • ven98
    ven98 ACE Posts: 4,073 Pathfinder
    Open 'run' command and enter 'msconfig'. Then go to boot>advanced options and set the maximum memory to 6000mb - this might work. The 4GB RAM you have installed is 1600mhz and your laptop supports up to 1066mhz but that cannot be a reason why this happens, as the ram is downclocked automatically to 1066mhz. It could be that there is some conflict between the integrated and dedicated ram. I don't see other reason why this happens.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • ven98
    ven98 ACE Posts: 4,073 Pathfinder
    Most likely the ram is not compatible with your laptop.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • cuguys
    cuguys Member Posts: 5 New User

    Set 0 memory to 6144MB no difference still shows hardware figure set aside of 4.6GB.