manual of G45T/G43T-AM3 V:1.0 mother board

carlonb
carlonb Member Posts: 5 New User
edited March 1 in 2019 Archives

Hi all,

I'm new on this community and I hope you can hel me to find and dowload the manual on subject.

I've a Desktop PC ACER ASPIRE M3800 and i'd like to have the manual of my motherboard.

It's two or three days I'm looking for it but with no results.

With Speccy the mother board is recognized as EG43M (CPU 1) so I'm confused, anyway my MB is like the picture annexed here.

acer-eg43m.jpg

Thanks a lot

Carlo

Answers

  • laurent_14
    laurent_14 ACE Posts: 10,285 Trailblazer

    Hi Carlo,

     

    As far as I know, there are only two motherboards for this series:

    Spoiler
    Part numberDescription
    MB.SC407.002MAIN BD.GMA.X4500.W/1394.LF
    MB.SC409.002MAIN BD.GMA.X4500.W/1394.LF

    Do you see a white sticker with a bar code on your motherboard?

    What kind of information do you need exactly?

    France
  • carlonb
    carlonb Member Posts: 5 New User

    Hi Laurent,

    Thanks for the reply, the only sticker I see has this: G43T-AM3(SN).

    Can you help me about the mb manual?

    My problem started about 15 days ago. When I turn the PC on, after few minutes (2 or 3) it freeze and I have to turn it off and on again. This happens for 2 or 3 times, finally then when it starts, it does not stops anymore and run OK.

    I'm investigating the reason.
    I've already cleaned my Windows 10 following the Microsoft site tips but not solved.
    Any hint?
  • laurent_14
    laurent_14 ACE Posts: 10,285 Trailblazer
    1. Do you have a critical error in Event Viewer?
    2. Is it the original CMOS battery?
    France
  • carlonb
    carlonb Member Posts: 5 New User

    Hi Laurent,

    CMOS battery already changed with a fresh one but not solve.

    Where I can find Event Viewer?

    About the manual? Seems impossible to find it...Smiley Sad

    Thanks

     

    Edit: May be I found the Event Viewer, this is the cause "Kernel-Power" event ID 41 Hope will be usefull.

  • laurent_14
    laurent_14 ACE Posts: 10,285 Trailblazer

    First you should try to disable "Turn on fast startup" and check if you still have the issue:

    https://www.tenforums.com/tutorials/4189-turn-off-fast-startup-windows-10-a.html

     

    Did you get a BSOD (blue screen of death) for 15 days?

    France
  • carlonb
    carlonb Member Posts: 5 New User

    Just now disabled "Turn on fast startup" and I will see if this solve.

     

    I do not get a blue screen, simply the screen (and the whole PC) merely freezes where it is at that moment (desk top or an app or navigating on web....), no mouse or ctrl-alt_del or any other action will be possible.

     

    I'm asking also for the MB manual, what do you think? It's available around the world? It's available in Acer archives?

    Thanks, Carlo

  • carlonb
    carlonb Member Posts: 5 New User

    Hi Laurent,

    Seems that disabling "fast startup" do not solve the PC freezing, anyway now it' freezing less than before.

    Needs more investigation.

     

    @Laurent and all community users, Please help me to find the manual of this MB "G45T/G43T-AM3 V:1.0" this model is printed on my MB, with Speccy the MB is reported as "EG43M (CPU 1)".

     

    Thanks

     

     

  • StoreNord
    StoreNord Member Posts: 2 New User
    edited August 2019
    I meant try this one. But be careful, my Firefox has some warnings.


    [Edited by moderator dot to warning on link shared by user]
This discussion has been closed.