I recently bought two Acer Iconia W511 Tablets with Keyboard Docks at auction, they had had their Memory chip removed (the small daughter board with the 64gb storage on one side and the microsd & sim card slot on the other).
I purchased a replacement daughter board from the US and it arrived earlier today. Upon installing it and connecting the charger, when I start the unit all I get is a yellow message on screen which says:
"Secure storage authentication failed. Contact your support representative.
Error Code = 0x10000011"
it then reboots after a few seconds and shows the message again, over and over..
I've tried holding the Volume down button and pressing power to get into bios but it doesn't seem to accept it, I haven't been able to get into bios or get passed this message whatsoever..
I realise that the credentials on the new memory chip will be different, and that this is likely the central cause of the error message, but I can't seem to find a way to get into the bios to set a supervisor password so that I can disable 'secure storage'. And without the daughter board in there the unit wont power on at all (tried that too)..
Am really hoping someone here has seen the problem, or knows a way to get around/or correct it?
Many thanks.