V3 111p - Wont boot? Update - RAM

nathan_thomas
nathan_thomas Member Posts: 1 New User
edited March 2023 in 2017 Archives

Hi, A couple of days ago i tried to switch on my laptop but with no luck.

I have since replaced the battery and tested the charing cable and port, all are fine. The laptop shows the battery is charing and that the charing port is attached. 

Bascially nothing happens when i push the power button... however (having saw online) when i hold FN+ESC the fan inside the latop powers up... Online ppl say it's the BIOS that needs flashed etc. Although i did try it with a bootable USB but then it just seems to cut out after 10/20seconds goes into a boot loop to try again - with no results. The screen shows no picture. 

Any other ideas or something i'm missing? Any advice would be very much appreciated. 

Thanks. 

Update: OK so i tried take out all hardware and reboot no luck... add one by one no luck. But one thing i did find weird was that when i replaced the RAM with a knowing working bit.. i was unable to boot using the FN+ESC kets... soon as i put back the old RAM it can the HDD spins but black screen is bizzare??? Is it possible it's still a BIOS issue or am i looking at a new motherboard?