Installed new hard drive and get the several different messages why it cannot finish running setup?

Irvin_g71
Irvin_g71 Member Posts: 1 New User

Acer Aspire 650 gb, the hard drive went bad would not let the computer start just black screen with constant beeping.

Put a new 1t hard drive from the same company that was used in the original compter.

I have gotten several messages,

1. Could not complete installation

2. Could not configure to hardware 

3. Booting is missing

4. And the final one is restore fail-error code= OX17(data error (cycle redundancy check).)

I used the original CDC that I was told to make when I first bought the computer.

I could not start the computer at all so could not get nothing off the old drive.

 

Anyone help please?

Answers

  • Tabbiekatz
    Tabbiekatz Member Posts: 760 Mr. Fixit WiFi Icon

    What is the model of this comptuer? I need to see if there is a "bios block" to see if the motherboard will recognize anything higher than a 650G Hard drive.

  • Tabbiekatz
    Tabbiekatz Member Posts: 760 Mr. Fixit WiFi Icon

    I also need the make, model and speed of the new hard drive that you installed.

This discussion has been closed.