RAM upgrade for E17-E5-773G-JA

Valerian79
Valerian79 Member Posts: 2 New User

Hi guys,

 

So I recently purchased a new laptop, thinking I'll upgrade it over time as I usually do with my equipment. Apparently this isn't the best idea when it comes to (some?) laptops if you don't do your research. The laptop was on offer for $600 instead of the usual $700-$750 so I couldn't pass it up.

 

The problem with this particular laptop is: it's incredibly slow, thanks to both the standard hard drive and the meager 4 GB RAM... which is a shame, because it sports a Core i5-6200U which should be snappy enough.

 

If it ends up I can only upgrade the drive (it seems accessible, although wedged in where no normal screwdriver has gone before) then so be it, it will still make for a great speed boost.

 

The problem here lies in the fact I already purchased the RAM and don't want to return it until I know 100% sure I can't upgrade the laptop myself, or at all - in case the memory is soldered on.

 

For those who know what the laptop's innards look like, when the shell is opened up you will see 2 cables in the middle like suicidal booby traps if you opened up the enclosure too much by force. The black flat cable seems vital and stuck in place, whereas the white/grey cable seems detachable. My thought is that there is a chance of memory banks being present on the underside of the motherboard... or they're soldered on, in which case my adventure ends.

 

Obviously I could've purchased a laptop with more memory and/or an SSD already mounted in place. The idea was to hold out 6-12 months until the larger sized SSDs come down in price, and opt to upgrade the memory first. Also my experiences with laptops is they have a bottom latch or easily removable bottom shell that exposes the drive, RAM and Wi-Fi module. Lesson learned here.

 

The questions:

 

- Does this particular laptop have memory slots for DDR3L 1.35V modules or is the existing memory soldered into place? Am I overlooking something? If upgradeable, how do I remove the ribbons, particularly the black ribbon, without damaging it?

- Does the back part of the laptop bottom shell come off? If it doesn't, unscrewing the motherboard will be a hassle with the tools I currently have.

- Has anyone tried to replace the drive in this laptop and how did you go about it with removal of screws? I noticed at least 1 screw on the side that can't be twisted unless you use some kind of 90° twist transfer screw tool (don't know the name of it)

- Unrelated to the topic: what would be the best cloning tool to actually make the clone of the original drive work? I've heard some horror stories about the UEFI/BIOS not seeing the clone because of drive identifiers and whatnot.

 

Thanks!

Best Answer

  • philetus
    philetus ACE Posts: 4,759 Pathfinder
    Answer ✓

    It takes DDR3L 1600 1.35v, Max is 16GB, 2 slots

    Acer memory part numbers

    SODIMM 2GB DDR3L 1600 ACR16D3LFS1KBG/2G KN.2GB0G.045

    SODIMM 2G HMT425S6CFR6A-PB DDR3L 1.35V KN.2GB07.015

    SODIMM 4G ACR16D3LS1KNG/4G DDR3L 1.35V KN.4GB0G.029

    SODIMM 4GB DDR3L 1600 M471B5173EB0-YK0 KN.4GB07.023

    SODIMM 4G HMT451S6BFR8A-PB DDR3L 1.35V KN.4GB0B.034

    SODIMM 8G ACR16D3LS1KNG/8G DDR3L 1.35V KN.8GB07.022

    The back of the laptop does not come off. The keyboard/palmrest comes off and the motherboard has to be removed because the memory is on the bottom side.

    A SSD is easier although you still have to remove the palmrest/keyboard.

    You can swap the HDD for a SSD or you can install a m.2 SSD.

    Acer m.2 SSD part Numbers

    SSD-M 128GB RBU-SNS8100S3/128GDM.2 6G KN.1280L.011

    SSD-M 128GB L8T-128L9G FW:H871201 6G 228 KN.12807.010

    SSD-M 256GB RBU-SNS8100S3/256GD M.2 6G KN.2560L.010

    SSD-M 256GB L8T-256L9G FW:H881201 6G 228 KN.25607.010

    I use TrueImage 2014 HD and it has never failed me.

     

Answers

  • philetus
    philetus ACE Posts: 4,759 Pathfinder
    Answer ✓

    It takes DDR3L 1600 1.35v, Max is 16GB, 2 slots

    Acer memory part numbers

    SODIMM 2GB DDR3L 1600 ACR16D3LFS1KBG/2G KN.2GB0G.045

    SODIMM 2G HMT425S6CFR6A-PB DDR3L 1.35V KN.2GB07.015

    SODIMM 4G ACR16D3LS1KNG/4G DDR3L 1.35V KN.4GB0G.029

    SODIMM 4GB DDR3L 1600 M471B5173EB0-YK0 KN.4GB07.023

    SODIMM 4G HMT451S6BFR8A-PB DDR3L 1.35V KN.4GB0B.034

    SODIMM 8G ACR16D3LS1KNG/8G DDR3L 1.35V KN.8GB07.022

    The back of the laptop does not come off. The keyboard/palmrest comes off and the motherboard has to be removed because the memory is on the bottom side.

    A SSD is easier although you still have to remove the palmrest/keyboard.

    You can swap the HDD for a SSD or you can install a m.2 SSD.

    Acer m.2 SSD part Numbers

    SSD-M 128GB RBU-SNS8100S3/128GDM.2 6G KN.1280L.011

    SSD-M 128GB L8T-128L9G FW:H871201 6G 228 KN.12807.010

    SSD-M 256GB RBU-SNS8100S3/256GD M.2 6G KN.2560L.010

    SSD-M 256GB L8T-256L9G FW:H881201 6G 228 KN.25607.010

    I use TrueImage 2014 HD and it has never failed me.

     

  • Valerian79
    Valerian79 Member Posts: 2 New User

    Hello,

     

    I was finally able to get the rear motherboard screw loose - it's at a really awkward position and my Philips offset screwdriver was 1 size too big I guess. This took a bit of work to get everything unhooked and not break the flat cables, but the mission has been completed.

     

    Now SSD prices need to come down a bit more so I can splurge on a 1 TB drive Smiley Happy

     

    Thanks for the information provided earlier, I couldn't find any relevant info on Youtube about this specific laptop so this helped.