Upgrade Acer E1-531 RAM from 1333mhz RAM to 1600mhz?

grande

As E1-531 supports DDR3 1333mhz 1.5v sodimm is it possible to be upgraded with DD3 1600mhz sticks?

 

I am using 2x2GB DDR3 1333mhz

 

I want to replace 1x2GB DD3 1333mhz with 1x4GB DD3 1600mhz

 

So the final result will be 1x4GB DD3 1600mhz + 1x2GB DD3 1333mhz = 6GB RAM with different kind of sticks.

 

Is it ok, is it compatible and will it works without problems afterwards?

 

Thanks

laurent_14

Hello,

 

You can upgrade 2+4Gb without any problems but that depends of the brand and the part number of memory modules. They will work at 1333MHz.

1. Which are the brands and the part numbers of original memory modules?
2. Same question about the other part?

laurent_14

Hello,

 

You can upgrade 2+4Gb without any problems but that depends of the brand and the part number of memory modules. They will work at 1333MHz.

1. Which are the brands and the part numbers of original memory modules?
2. Same question about the other part?

grande

At first tnx for the fast response,

 

1.

Slot 1 - Manufacterer Trascend, Max bandwidth PC3-10700 (667 MHz), Part number JM1333KSN-2G, Nominal Voltage 1.50 Volts, Number of banks 8

 

Slot 2 - Manufacturer (ID) Hyundai Electronics, Max bandwidth PC3-10700 (667 MHz), Part number HMT325S6BFR8C-H9, Serial number 4F796ED6,  Nominal Voltage 1.50 Volts,  Number of banks 8

2. 

I've not choosen the new brand yet. May be my choice will be A-DATA 2x4GB

laurent_14

May be my choice will be A-DATA 2x4GB

 

Well I advise you these Adata part numbers (100% compatible):

Spoiler

AD3S1600C4G11 - 4Gb 1600MHz
AD3S1600W4G11 - 4Gb 1600MHz

grande

Tnx again Laurent!

 

I check the Store. They have A-Data sticks with Part number - AD3S1600W4G11 - b

Is there a difference between AD3S1600W4G11 and AD3S1600W4G11 - b or it is OK?

laurent_14

Hello,

 

For this memory module, no differences. It's a packaging code (blister, retail, small box or 2 parts).

-B, -R, -S or -2 (2x4Gb)

gokugoq

hey guys.

i have a question too. I want to upgrade ram memory on my e1-531g.
this is what i have, shown on CPUz : https://i.imgur.com/m9kyv5W.png.
It's a 4gb, 1333 mhz.

this is what i want to buy. - Kingston KCP316SS8/4, 4GB, DDR3, 1600MHz, CL11

Will they work togheter? Thnaks a lot.

gokugoq

> this is what i want to buy. -Kingston KVR16LS11/4, 4GB, DDR3, 1600MHz, CL11
FIXED THE MEMORY DESCRIPTION

brummyfan2

Hi,
The difference between them is the voltage, you have 1.5v memory and Kingston is a low voltage memory(1.3v). It's better to install memory modules with same specs.
Try to get matching module as exactly as your current module.