Aspire E15 E5-573G-51U8 embedded display port

voolandis
voolandis Member Posts: 11 New User

Hello everyone,

 

I don't have a problem with this wonderful machine, but a question to ask:
Since I've been learning to use Adobe products, I don't find the color gamut of this HD TN panel unit quite satisfying, so I decided to upgrade it to an IPS FHD.

 

My question is: does Aspire E15 E5-573G-51U8 uses 1 lane or 2 lane eDP (embedded display port) to connect motherboard with display panel? (having in mind that it is a 30 pin connector, right?)

I need this information because 1 lane supports displays up to 900p (in my case it's a 768p screen), while 2 lane is minimum for 1080p screen which I plan on bying (AU Optronics B156HAN01.2 - Specifications). Basicaly a 1 lane display panel can and will work while attached with 2 lane cable, but 2 lane display panel will not work if hooked on 1 lane cable.

Additional Info:
Model: E5-573G-51U8
S/N: NXMVMEX045          (first 10 characters)
MFG DATE: 2015/06/25

 

Thank you in advance!


Smiley Happy

 

 

Best Answer

  • laurent_14
    laurent_14 ACE Posts: 10,357 Trailblazer
    Answer ✓

    Hello,

     

    Wow! Many researches... but I found Smiley Happy.

    So your laptop is equipped with this motherboard: Intel I5-5200 and nVidia GeForce 920M-2Gb.

    I found a lot of models with this one in HD or FHD.

    1. The eDP cable is the same for both models:
      Spoiler
      50.MVQN7.001 - LCD.CABLE (for the HD or FHD panels)
    2. The original FHD LCD panels:
      Spoiler
      AUO - B156HTN03.8
      CMI - N156HGE-EAB (your part number is compatible with this one)

    You can upgrade without any problems.Smiley Wink

    France

Answers

  • laurent_14
    laurent_14 ACE Posts: 10,357 Trailblazer
    Answer ✓

    Hello,

     

    Wow! Many researches... but I found Smiley Happy.

    So your laptop is equipped with this motherboard: Intel I5-5200 and nVidia GeForce 920M-2Gb.

    I found a lot of models with this one in HD or FHD.

    1. The eDP cable is the same for both models:
      Spoiler
      50.MVQN7.001 - LCD.CABLE (for the HD or FHD panels)
    2. The original FHD LCD panels:
      Spoiler
      AUO - B156HTN03.8
      CMI - N156HGE-EAB (your part number is compatible with this one)

    You can upgrade without any problems.Smiley Wink

    France
  • voolandis
    voolandis Member Posts: 11 New User
    Wow, now this was express!
    Thank you so much!
    I will report on the outcome of my little experiment as soon as the panel arrives. Shipping from China to Montenegro might just take a while Smiley Tongue
    Kudos, kudos, kudos!
    Cheers!
  • laurent_14
    laurent_14 ACE Posts: 10,357 Trailblazer

     You're welcome

    France
  • voolandis
    voolandis Member Posts: 11 New User

    Hi!
    Just to report on the upgrade. Yesterday display has finally arrived and I installed it.
    Everything works perfect,  the image quality if unbelievable!
    Thanks again!