acer predator g3-605 wont start after bios update

peki21
peki21 Member Posts: 1 New User

hello. today i tried to update my bios, and went to the acer site. i picked my pc, and there was 2 updates i could download. one was named p11-b4 (that was my current version) and other was p11-c1. the c1 was some months newer, so thought that why not. i downloaded the c1, and extracted it. i opened the file calledafuwingui.exe, and in the exe i opened the rom file called p11-c1.cap and updated the bios. all went fine, i checked hwinfo and it still said i had the old bios version. i restarted my pc normally and checked it again,this time it was the newer bios version. after some time, i restarted my pc again, but this time something went wrong. the pc starts, but it wont show anything on my screens, and it gives me different beep when i turn it on. my keyboard/mouse wont light up, but weirdly my headset lights for some seconds. the graphics card is running(checked if the fan was running and it was) also the cpu fan is a bit louder than it was.

after the update i didnt change anything from anywhere, and it restarted ONCE properly after the update.

what ive tried so far is taking the battery off from the motherboard for like 5 minutes, and trying my luck with the cmos jumper, but nothing has worked. everytime i took my power cable off just to make sure i dont have any power while doing this. i changed the cmos from the 2 left pins(default) to the 2 right ones, but didnt work. the cmos covers 2 of the 3 pins incase someone wonders. i also tried to connect my other monitor to the onboard graphics with hdmi but it didnt show anything. also ive removed the rams and replugged the psu cable, but didnt help. the powers never came off while doing the bios update, so im really confused. need desperate help resetting my bios/getting my pc to work again.

specs: i5 4440
nvidia gtx 760 oem
8 gb of ram(2sticks)

also forgot to mention, that i havent turned the pc on when the cmos jumper was on the right pins(this should be the reset). on some topics people say the pc should be started with the jumper being reseting, and some people say it shouldnt be. so im out of ideas.