V3-571g Bios update

dark2light
dark2light Member Posts: 2 New User
edited December 2023 in 2020 Archives

Hello,

My laptop didn't come with any OS installed. Now I'm running Windows 10 and I have Bios v1.13. Can I update to the latest version (2.21) ? 

Answers

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer

    you can't mix BIOS versions.

    BIOS 1.x can be updated only using BIOS 1.x version

    BIOS 1.x can be updated only using BIOS 1.x version

     

    so you have already the latest available for your laptop.

    I'm not an Acer employee.
  • dark2light
    dark2light Member Posts: 2 New User

    Thank you for your reply. I have another question: Can I reflash the same version of the BIOS?

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer

    yeas, as far as i know.

    I'm not an Acer employee.
  • StevenGen
    StevenGen ACE Posts: 12,142 Trailblazer
    edited November 2019

    You can flash and upgrade Insyde Legacy Bios to UEFI on V3-571G, here is how its done and it works 100%, I've done this to my V3-571G and it works perfectly but, you have to reinstall Windows 10 to get the perfect result, as converting your legacy HDD format to UEFI after BIOS change is very tedious and its easier to just do a clean install of either Windows 8, 8.1 or 10.

    Here are the steps:

    This is for BIOS - UEFI for Windows 8 (Not for 8 Upgrades)

    The UEFI BIOS (e.g. v2.xx) enables the UEFI BOOT ENVIRONMENT, which has many benefits, see benefits of UEFI BIOS. 

          a. Laptops with Windows 7 pre-installed have a normal BIOS (e.g. v1.xx) . 

          b. Laptops with Windows 8 pre-installed have UEFI (e,g, 2.xx) 

    This guide is oriented to all laptops that have Windows 7 (Legacy BIOS)

    Here are the instructions:

    1. Open your xxxxx.exe (which is the windows BIOS flash) with your favourite 'hex editor'. 

    2. In 'hex editor' go to search and find the string: DisableSecureCapsuleFlash=1

    3. Then, change the string to: DisableSecureCapsuleFlash=0

    4. Save it 

    5. Flash it normally

    6. After rebooting, you will find a new option in the Boot tab called 'UEFI '

    7. Switch between Legacy Boot and UEFI (see caption below)


  • mrvamrak
    mrvamrak Member Posts: 1 New User
    thnx.. works great..