Acer Aspire 5700 crashes

chattychathy
chattychathy Member Posts: 4 New User

 

I have an Acer Aspire 5700 desktop purchased in January of 2010 that is experiencing freeze/crash issues that I can’t resolve. It runs Windows Vista Home Premium, but I do not have the disks. Here are the specs
http://www.ncix.com/detail/acer-aspire-am5700-e5801a-intel-core-ed-42614.htm

 

I had the same issue last year, starting in June, then it suddenly stopped in September, and didn’t occur again until June 21, of this year, and then every day since last Friday.

Shortly after booting, the computer does one of two things:
-the monitor goes black and says there is no signal, and only the blue power light on the tower stays on, or
-the desktop/programs freeze. In both cases I have to reboot from the tower.

 

In researching similar problems, it was suggested that this was a heat, bad memory, or graphic card issue. I have a temperature check and that shows acceptable temperatures. Plus, if it were heat, it would occur after the computer has been on for hours and not within 15 minutes of booting. Memory tests have been run and confirmed that it was all good. I have checked the seating of the graphics card as well as all cables, and that is not the problem either.

 

All my drivers are up to date as far as I know. I ran WhoCrashed and here are the reports for two of the latest crashes. It does not show a report for the ones that occurred July 10, 11 and 12:

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.

On Mon 7/13/2015 12:37:20 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\Mini071315-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x57150)
Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF8000291074E, 0x0, 0xFFFFFFFFFFFFFFFF)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

 

 

On Sun 6/21/2015 2:25:46 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\Mini062115-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x57150)
Bugcheck code: 0x7F (0x8, 0x80050031, 0x6F8, 0xFFFFF800026EA494)
Error: UNEXPECTED_KERNEL_MODE_TRAP
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that the Intel CPU generated a trap and the kernel failed to catch this trap.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

 

Here are the two BSODs I got, one yesterday and one today:

 

July 12 error msg.jpg

 

July 13 error msg.jpg

 


I would greatly appreciate any insight you might have. I love my Acer computer. I have used Acer desktops since 1996. It is an older model but it does what I want, and that’s the most important feature to me.

 

Answers

  • chattychathy
    chattychathy Member Posts: 4 New User

    I should add that once it is up and running I have no more problems, during the day. Only when booting up.

     

    Today I got another BSOD with basically the same message except the line that lists the problem gives a different  error name: PAGE_FAULT_IN_NONPAGED_AREA. This is the dump report:

     

    On Tue 7/14/2015 1:09:43 PM GMT your computer crashed
    crash dump file: C:\Windows\Minidump\Mini071415-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt+0x57150)
    Bugcheck code: 0x50 (0xFFFFFFFFFFFFFFFF, 0x8, 0xFFFFFFFFFFFFFFFF, 0x0)
    Error: PAGE_FAULT_IN_NONPAGED_AREA
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: NT Kernel & System
    Bug check description: This indicates that invalid system memory has been referenced.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.