Problems with easyStore h340 new network card

RickBosscha
RickBosscha Member Posts: 2 New User

Hello,

 

I bought a second hand EasyStore H340.

The only thing about it is that the network card on the mainboard was defective.

That's why I bought a new network card. But I dont know how to install it now.

 

Can someone please help me?

Answers

  • Fletcher-Acer
    Fletcher-Acer VIP Posts: 92 Fixer WiFi Icon

     

    On the H340 home server the network card is built on-board. Before you have the MB replaced or try to install a network card, please verify NIC is the issue:

     

    Verify connections and LEDs

    Verify that the network cable is properly connected to the back of the computer. In addition, when checking the connection of the network cable, ensure that the LEDs on the network are properly illuminated. For example, a network card with a solid green LED or light usually indicates that the card is either connected or receiving a signal. Note: generally, when the green light is flashing, this is an indication of data being sent or received.

    If, however, the card does not have any lights or has orange or red lights, it is possible that either the card is bad, the card is not connected properly, or that the card is not receiving a signal from the network.

    If you are on a small or local network and have the capability of checking a hub or switch, verify that the cables are properly connected and that the hub or switch has power.

     Also, according to specs the MB has an x4 PCI Express slot.

  • RickBosscha
    RickBosscha Member Posts: 2 New User

    The connector onboard is not responding to anything.

    No lights will burn. I have tried several network cables and also a few different switches.

     

    The new network card is giving me al lot more signs of life. But I can't connect to the H340.

    But because of the need to install drivers the network card will not get an IP address.

     

    therefore i need to control the H340.

This discussion has been closed.