Remote not working after Windows 8 upgrade

Options
nessiemon
nessiemon Member Posts: 2 New User

After I upgraded my Revo Rl70 to Windows 8 the supplied Remote Control does not work with either Windows Media Center or XBMC. Not response to any button press at all. LED on remote flashes, but that is all. I have tried installing the eHome device, but no luck. Changed the remote batteries also.

 

Help needed.

Best Answer

  • russieb
    russieb Member Posts: 18

    Tinkerer

    Answer ✓
    Options

    Solved!  See other thread.

     

    http://community.acer.com/t5/Acer-All-In-Ones-Desktops/How-do-you-get-the-Revo-70-remote-control-to-work-under-Windows/m-p/44727


    Riad wrote:

    Had the same problem on the same hardware, found these posts got very upset and fixed the issue.

     

    I am running Windows 8 Pro 64bit - Clean install (not upgrade) and same remote control

     

    Here is how:

     

    1. Download "FIR_ITE_5.1.0.8_W7x86W7x64_A" from Acer site

        (Select Windows 7 64 bit)

    http://global-download.acer.com/GDFiles/Driver/FIR/FIR_ITE_5.1.0.8_W7x86W7x64_A.zip?acerid=634614370273105234&Step1=Revo&Step2=Revo&Step3=RL70&OS=701&LC=en&BC=Acer&SC=PA_6

     

    2.  Extract ZIP file your downloaded. Do not run setup.

        

          Navigate to folder  ...FIR_ITE_5.1.0.8_W7x86W7x64_A\FIR_ITE_5.1.0.8_W7x86 x64\INFDrv

     

    3. Double-click on reg file called "InstallRegistry.reg" to import setting.Make sure to answer all prompts Yes and OK

     

    4. Reboot your PC

     

    5. If should start working right after you login, but you might need to start "CIRAP.exe" file that is located in the same folder that REG file it.

     

    Above steps should work if you devices are running properly:

      To check open your device manager:

          Control Panel\All Control Panel Items\Device Manager

        and make sure that you don't have any exclamation points on some unknown devices

     

       You should also see two devices in the list under the "Human Interface Devices"

           ITECIR Infrared Receiver (SIO2)

           and

            Microsoft eHome Infrared Tranceiver

     

     

    This worked for me just now so it should work for you too.

     


Answers

  • Tommy-Acer
    Tommy-Acer VIP Posts: 6,317 Seasoned Specialist WiFi Icon
    Options

    I'm not seeing anything indicating the remote should no longer work under Windows 8.

     

    All of the drivers we have available for the system are posted on our Drivers site.

     

    Do you have any hardware in Device Manager with an exclamation point or red x on it?

  • nessiemon
    nessiemon Member Posts: 2 New User
    Options

    I presume this is the eHome device. However, there are no device errors in the Device Manager.

    No drivers shown for Win 8 64 bit on Drivers site.

    Any other suggestions to troubleshoot are welcomed.

  • Tommy-Acer
    Tommy-Acer VIP Posts: 6,317 Seasoned Specialist WiFi Icon
    Options

    I show 5 different TV tuners and a VGA driver for Windows 8 64-bit for upgrades on the US Drivers site.

     

    You presume that what is "the eHome device" ?

     

  • stavross
    stavross Member Posts: 3 New User
    Options

    I have also upgraded from Windows 7 (Home Premium) to Windows 8 Pro, and have exactly the same problem.

     

    I have uninstalled the eHome driver, removed the usb ir, rebooted, replaced the usb ir, but the remote is still not working.

     

    I have an Acer Revo RL70, which came bundled with wireless mouse, keyboard and remote.

  • russieb
    russieb Member Posts: 18

    Tinkerer

    Options

    Same problem here.  Appears as if this is a common problem.  Was there any resolution?

     

    If not, in response to your questions Acer-Tommy, hopefully I can answer.

     

    1.) 

     

     


    Acer-Tommy wrote:

    I'm not seeing anything indicating the remote should no longer work under Windows 8.

     

    All of the drivers we have available for the system are posted on our Drivers site.

     

    Do you have any hardware in Device Manager with an exclamation point or red x on it?

     


     

    No, there are no devices that display an exclamation point or red x.

     

     

    2.) 


    Acer-Tommy wrote:

    I show 5 different TV tuners and a VGA driver for Windows 8 64-bit for upgrades on the US Drivers site.

     

    You presume that what is "the eHome device" ?

     


     

    I can see the Windows 8 drivers available, none appear to be applicable to this particular problem.

    presume nessiemon is referring to the "Microsoft eHome infrared transceiver" that can be found in the device manager. also presume this is the device that is the issue.

     

    Stavross seems to have tried all the obvious things with no luck.

     

    What else could be the issue?

    Help much appreciated!  No having a remote for our main TV is extremely frustrating!

     

  • russieb
    russieb Member Posts: 18

    Tinkerer

    Options

    While awaiting a response, I have done some more digging.  As discussed, there are no suitable drivers for any Infrared device on the Acer drivers web page for RL70 running Windows 8.

     

    There are however, IR drivers for the RL70 running windows 7, which I presume are already "running" and don't work.  Crucially, there are drivers for the RL80 running windows 8.

     

    Can someone from Acer please advise as to which driver we should be using?  Thanks.

  • russieb
    russieb Member Posts: 18

    Tinkerer

    Options

    While waiting for some form of response, I decided to try myself.

     

    Thinking the driver for the Infrared device was the problem I pressed ahead.  Currently installed are:

     

    FIRITEFIR Driver5.1.0.86.6 MB2012/01/06

     

    I tried upgrading the driver to that was listed fro the RL80, but are supposedly designed(?) for Windows 8.

     

    FIRITEFIR Driver5.2.0000.06.7 MB2012/11/12

     

    Unfortunately made no difference.  I still have a brand new machine with a remote control that doesn't work.

     

    Any assistance please?

  • russieb
    russieb Member Posts: 18

    Tinkerer

    Options

    I didn't mention the device in the Device Manager is the 

    ITECIR Infrared Receiver (SIO2)

     

    It can be found in the Human Interfaces Devices section along with the Micrososft eHome Infrared Transceiver device.

     

    Can anyone help?  Acer-Tommy?  There must be people reading this thread, it has over 300 views!

  • russieb
    russieb Member Posts: 18

    Tinkerer

    Options

    There doesn't seem to be any problems with the same Infrared hardware running on the RL80 in Windows 8.  This can't be a difficult issue to solve.

     

    The RL70 is supposed to be fully supported by Acer under Windows 8, so someone must know the answer.

     

    Come on Acer!

  • russieb
    russieb Member Posts: 18

    Tinkerer

    Options

    I have tried contacting Acer phone support who agree this product is fully supported under Windows 8.

     

    However, they claim this is a software problem, and to contact software support, even though it is clearly a driver issue and software support deal with application issues.

     

    The other issue is that software support comes with a £0.50 per minute charge which I refuse to pay for and have told Acer that.

     

    The is another thread on this issue, see below, where the user seems to have solved the problem with the RL80 driver, but neglects to mention how it was achieved.

    http://community.acer.com/t5/Acer-All-In-Ones-Desktops/How-do-you-get-the-Revo-70-remote-control-to-work-under-Windows/td-p/44727

     

    Overall I'm extremely disappointed with Acer's support offerings, no more so than this forum.

    There must be someone who can enlighten me with the solution.  What about the earlier posts in this thread?

     

    I'd appreciate if an Acer representative would step in here.

    Thanks.

  • russieb
    russieb Member Posts: 18

    Tinkerer

    Answer ✓
    Options

    Solved!  See other thread.

     

    http://community.acer.com/t5/Acer-All-In-Ones-Desktops/How-do-you-get-the-Revo-70-remote-control-to-work-under-Windows/m-p/44727


    Riad wrote:

    Had the same problem on the same hardware, found these posts got very upset and fixed the issue.

     

    I am running Windows 8 Pro 64bit - Clean install (not upgrade) and same remote control

     

    Here is how:

     

    1. Download "FIR_ITE_5.1.0.8_W7x86W7x64_A" from Acer site

        (Select Windows 7 64 bit)

    http://global-download.acer.com/GDFiles/Driver/FIR/FIR_ITE_5.1.0.8_W7x86W7x64_A.zip?acerid=634614370273105234&Step1=Revo&Step2=Revo&Step3=RL70&OS=701&LC=en&BC=Acer&SC=PA_6

     

    2.  Extract ZIP file your downloaded. Do not run setup.

        

          Navigate to folder  ...FIR_ITE_5.1.0.8_W7x86W7x64_A\FIR_ITE_5.1.0.8_W7x86 x64\INFDrv

     

    3. Double-click on reg file called "InstallRegistry.reg" to import setting.Make sure to answer all prompts Yes and OK

     

    4. Reboot your PC

     

    5. If should start working right after you login, but you might need to start "CIRAP.exe" file that is located in the same folder that REG file it.

     

    Above steps should work if you devices are running properly:

      To check open your device manager:

          Control Panel\All Control Panel Items\Device Manager

        and make sure that you don't have any exclamation points on some unknown devices

     

       You should also see two devices in the list under the "Human Interface Devices"

           ITECIR Infrared Receiver (SIO2)

           and

            Microsoft eHome Infrared Tranceiver

     

     

    This worked for me just now so it should work for you too.

     


  • Choiceheart63
    Choiceheart63 Member Posts: 1 New User
    Options

    You are the boss Russieb - many thanks, did not realise how much I used the remote until it was no longer working, cheers for your assistance, followed your instructions and worked perfectly.

  • MickRingo
    MickRingo Member Posts: 1 New User
    Options

    I just updated to 8.1 and my remote stopped working. I downloaded this http://global-download.acer.com/GDFiles/Driver/FIR/FIR_ITE_5.1.0.8_W7x86W7x64_A.zip?acerid=634614370273105234&Step1=Revo&Step2=Revo&Step3=RL70&OS=701&LC=en&BC=Acer&SC=PA_6 ran the setup program, and haven't had a drama since, dont need to start the CIRAP.exe or anything. everything works fine now. thanks for the post, was much helpful :-)

This discussion has been closed.