Issue of power on on acer v3-571g???

razieve

when i press the power botton it is dead after pressing several time it turns on. Same thing with charger after connecting charger for 3-5 min power light will be on . After turn on it works completely normal there is no problem with switch ,battery and charger. Sometime not everytime something it turns on after pressing once. we dont have to wait .Please Help

JackE

Does this sometimes happen whether or not the charger is plugged in?

 

Jack E/NJ

razieve

issue is only while power on , with or withour charger just at starting , after that .its ru smooth without any problem , with and withour changer

JackE

Are you still within the warranty period? If not, and this is more than a nuisance for you, I'd remove the top cover to access the power switch board and ribbon cable. Then re-seat the board and ribbon connections. The board part no. LS-7912P if re-seating doesn't solve the problem. http://www.pchub.com/uph/laptop/78-124587-31813/Acer-Aspire-E1-571-Series-Switch-Board.html

 

Jack E/NJ    

yuryv

I have had issues ordering from PCHUB taking forever for the parts to arrive. I usually use Impact they are inside the states and have it in stock.

 

http://www.impactcomputers.com/ls-7912p.html?filter_name=LS-7912P

JackE

OK. But first try re-seating the board and connectors. That may be all you need to do.

 

Jack E/NJ

razieve

there isnt any problem on battery , you talk about re-setting , i didnt understand how to do it , if you are talking about connection problem than , i dont think so cause it run smoothly after turned on with and without battery

razieve

Are you sure that problem is from power cable issue? 

JackE

No, not the power cable. We're taling about a thin ribbon cable that comes off of a board that the on-off button switch is soldered to. This ribbon connects to the motherboard. Check the image of this board on the PCHub site above to see what it should look like. 

 

Jack E/NJ    

razieve

okie thanks i will change that soon , please mention the preocedure and cost to change that cable..

JackE

I believe the replacement board and ribbon come as a unit that simply insert into the motherboard. You must remove the keyboard and back cover to access. The cost for the new unit is indicated on the websites above.

 

Jack E/NJ