Veriton X2611G PCi blanking plates

MikeGrant
MikeGrant Member Posts: 1 New User

Has anyone else had trouble removing the PCI blanking plates from one of these machines? I was expecting to be able to remove it by a combination of bending and pressing, but instead I had to drive two miles to buy a pair of side cutters to get it out due to the ridiculously strong spot welds holding it in!

Answers

  • danhession
    danhession Member Posts: 1 New User
    Have also had this problem. Had to put a PCI Express parallel card into a pc and had nocutters so had to bending it out which in turn bent the chassis making it very difficult to install the card. Either there is a certain way to do it or it is extremely poor design!!
This discussion has been closed.