BSOD when booting

Exscalibur

As the title reads I get Kernel_Data_Inpage_Error everytime I boot the computer after a while. After the BSOD the computer doest the repairing of the C:drive, and goes into windows as normal and I can go on about my day. So when I turn on the computer again the next morning the same thing happens.... What to do?

 

P.S. I would have linked the minidump but you can't attach anything here.

P.S. 2, im using the Aspire V3-571g

Tommy-Acer

From  Microsoft Answers:

 

The error code KERNEL_DATA_INPAGE_ERROR STOP: 0x0000007A states that the requested page of kernel data from the paging file could not be read into memory. It appears that there are some issues with the hard disk.

Use check disk command for any errors on hard disk -

Warning: Microsoft does not recommend interrupting the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For safety you can back up your data before using the check disk command.

Use the check disk commands as follows:
 1. Click Start.
 2. In search window type 'cmd' and ENTER. Right click and select 'Run as administrator'.
 3. Type at the command prompt CHKDSK /P and press ENTER to scan the disk.
 4. Then type CHKDSK C: /F /R and press ENTER to repair corrupt sectors, if there are any.

NOTE: The root drive has to be C: and the command may schedule a task at the system startup, if it does, then press Y to schedule a task and restart the computer to perform chkdsk.

Once chkdsk completes, boot to the desktop and then check.

You may refer to the below mentioned link for more details -
http://msdn.microsoft.com/en-us/library/ms793989.aspx

finlux

Hi Exscalibur

 

Kernel_Data_Inpage_Error usually refers to a hard disk fault. In the first instance, I'd back up all your data. Secondly, run the CHKDSK command:

 

(From the Microsoft Website):

 

 1. Click Start.
 2. In search window type 'cmd' and ENTER. Right click and select 'Run as administrator'.
 3. Type at the command prompt CHKDSK /P and press ENTER to scan the disk.
 4. Then type CHKDSK C: /F /R and press ENTER to repair corrupt sectors, if there are any.

NOTE: The root drive has to be C: and the command may schedule a task at the system startup, if it does, then press Y to schedule a task and restart the computer to perform chkdsk. Once chkdsk completes, boot to the desktop and then check.

 

Also make sure you've created the recovery disks - you will need them if you replace the hard drive to reinstall Windows. If the above doesn't stop the BSODs, then a new drive should sort you out!

 

 

EDIT - Beaten to it!!