Revo RL80 HDMI TV Video Display Problems.

Apota
Apota Member Posts: 1 New User

I've connected the Revo to 2 TVs via the HDMI and DVI ports. The desktop is too big to fit on the TVs and is being cut off at the edges. I read onine that you can use the overscan option on the TVs to fix the problem. I connected it to a newer TV and used that option and it fixed it, but the TVs I need to connect it too are older TVs and don't have that option. Is there something else I can do to fix this issue?

 

I tried installing the latest VGA drivers that I downloaded from the Acer website and when i tried to install them I get an error message saying the hardware doesn't meet the minimum requirements to install the drivers, or something simular to that.

 

Also, with the HDMI port I can't always get video to display unless I wiggle the HDMI cable that came with it. I don't know if it's a problem with the cable or the HDMI port itself.

 

Thanks for your help and time!

Answers

  • Tommy-Acer
    Tommy-Acer VIP Posts: 6,317 Seasoned Specialist WiFi Icon

    What operating system is on the computer?

     

    You may need to change resolution on the computer so that it will output to a resolution that the TV can support.

     

    VGA drivers, which ones specifically?

    What drivers are presently installed on the system?

     

    Are you 'wiggling' the connector or the cable itself?

      If it's the cable, you may have a break in the cable. 

      If it's the connector, there may be an issue with the port.

This discussion has been closed.