B276HUL and Dual-Link DVI?

dw00
dw00 Member Posts: 2 New User

Is the DVI connector on the B276HUL a dual-link capable connector, or is it single-link only? 

I've seen reviews and articles that say "dual link," but haven't found any information from Acer confirming that. 


I'm trying to use a dual-link DVI adapter, and only get 1920x1080 resolution.  I have a separate computer connected via DisplayPort, and I'm able to get the full WQHD resolution. 

 

Any suggestions? 

 

 

Answers

  • Tommy-Acer
    Tommy-Acer VIP Posts: 6,317 Seasoned Specialist WiFi Icon

    The specification information that I've seen shows:
       DVI-D (dual link) + 2 x HDMI® + DisplayPort (v1.2) + DisplayPort (v1.2) out + USB hub 3.0 (1 up, 4 down)

     

    I would make the suggestion to not use an adapter, but to use a dual link DVI cable between the PC and the monitor.

     

    Also, if the monitor works on one computer and not another, it may be a configuration issue. 

    For example, if the other PC is a notebook and you are trying to clone the video, it will only allow the maximum resolution of the built-in LCD of the notebook.  To use a higher resolution on the external monitor you would need to use extended monitor or make the external monitor the only display.

This discussion has been closed.