Jozac05 Die Hard

He is using the same stock cooler that came with prebuilt pc.

Does anyone here have any idea if there is available waterblock for this rtx3070 gpu? I'm planning to watercool my gpu, but i can't find the specific model for this. The mounting scre w of the waterblock and gpu pcb looks the same, the the rest of the location of the others screws are different.

Nice work mate! Glad you did. Temps is a lot better now due to more airflow. Mine, i was able to remove the 2 wifi wires and 2 antennas, then placed them inside my new pc case. I placed the antennas not the same but close as what it was on my predator case since i'm having a bigger case now. The wifi wires are long enough…

That is on full load, im rendering a 80gb+ worth of 360video. Im getting around 78c to 82c while gaming with fans on auto.

My pc current temps.

It's very easy actually. It's my 1st time to disassemble a pc and reassembling it agian. Just take a photo of each part you remove so you'll not get lost when your are about to reassemble it altogether again. Yes it's just stock psu, cause the asus rog thor i bought is not compatible with the mobo, the rog thor comes with…

It's thermaltake view 37 ARGB version.

What's the specific length of the small stand off? And the size of the thread? I just made my own thin locking washers to lock the 3 screws of the mounting cpu bracket in place, then i use the intel cooler mounting bracket of my NZXT Kraken M22. I completely rebuild my acer predator orion 3000 into a bigger case so i can…

You're welcome. I think samsung can squeeze a 3tb nvme on a 22110 form factor m.2, but it's gonna be one of the most expensive nvme drives in the market. Yes, i think 2tb ssd would work. Both my Samsung and Crucial m.2 has thermal pads on each sides. I also have some copper shims and I'm planning to stick it on top of the…

On my Predator 17 g9 i installed Samsung 960Evo 1tb nvme m.2 ssd as my primary os drive and on the upper slot i installed Crucial MX300 1050gb m.2 ssd 2280 as my gaming drive. Since both ssd i bought didn't came with ssd bracket what i did was i just improvised to keep my Crucial ssd in place using Scotch tape with the…

I've been using the Alienware 17.3 Vindicator Version 2 backpack and Alienware 17.3 inches laptop sleeve for my Acer Predator 17 g9. 

My 12tb 64gb ram Predator 17 g9 upgrades https://youtu.be/QPhrSD4wMaQ

My 12tb Predator 17 g9 upgrades. https://youtu.be/QPhrSD4wMaQ

My Samsung 960evo 1tb nvme ssd and Crucial mx300 1050gb ssd didn't came with ssd bracket, but managed to improvised to keep the top m.2 2280 in place. 

My 12tb Predator 17 g9 upgrades. 🥂 https://youtu.be/QPhrSD4wMaQ

I've installed 2 seagate backup plus 5tb high capacity mechanical drives. 1 in the main hdd slot, the 2nd is on the dvdrom bay using a 9mm dvdrom caddy and did some rewiring the female sata port to position the female port upside-down so i can fit the 15mm 5tb drive perfectly in the dvdrom bay. 

I installed the Kingston HyperX Impact DDR4 2400MHz Gaming Ram on top of the 32gb ram it came with my Predator 17 g9, total ram installed 64gb.

The doable upgrades for predator 17 g9. My 12tb storage setup. https://youtu.be/QPhrSD4wMaQ

I've installed the Samsung 960evo 1tb as my main drive, then another Crucial mx300 1050gb as my gaming drive. Then installed 2 seagate backup plus 5tb high capacity mechanical drives. The dvdrom caddy i'm using is the 9mm. Then made some few modifications like rewiring the female sata to inverted position and aligning the…

Here the doable upgrades for your predator g9. ☺ https://youtu.be/QPhrSD4wMaQ