Lsi onboard SAS software RAID 相關資訊
1.我如何開啟LSI onboard SAS software RAID?
Ans:請在開機過程中按下F2進入BIOS
a. Please load default BIOS settings.
b. Please select Advanced.
c. Please select SCU Configuration.
d. You might see below information:
Storage Controller Unit [Enabled]
SCU RAID Option ROM [Legacy]
SCU Option ROM CodeBase [Intel]
e. Please make sure the setting of Storage Controller Unit is Enabled.
f. Please specify SCU Option ROM CodeBase as LSI.
SCU Option ROM CodeBase [LSI]
g. Please save the setting and exit from BIOS Setup.
2.我如何設定LSI onboard SAS software RAID?
Ans:你若已經開啟LSI Onboard SAS software RAID, 在開機POST畫面中你會看到以下畫面
3. LSI Onboard SAS software RAID support支援哪些RAID功能?
Ans:請參考以下資訊
NOTE 1. Not every OS can support disk space up to 2 TB.
NOTE 2. When RAID volume is created, it can be initialized on the background. RAID volume can be
immediately available without completing the fully initialization.
NOTE 3. Drive coercion refers to the ability of the RAID controller to recognize the size of the physical drives
that are connected and then force the larger drives to use only the amount of space available on the smallest
drive. Drive coercion as implemented in these RAID controllers also allows an option to map out a reserved
space to compensate for slightly smaller drive sizes that may be added later. It is 64 MB by default and cannot
be changed.
NOTE 4. More information of NCQ can be found at:
http://www.serialata.org/technology/ncq.asp
NOTE 5. AR360 F2 plans to support uEFI with LSI Onboard SAS RAID in Q3/2012.
4.LSI Onboard SAS software RAID支援哪些作業系統?
Ans:請參考以下資訊
