AT310F2在MegaRAID 9240-4i 的EFI mode上安裝作業系統完成後,當在RAID損毀(如RAID1中有一顆HDD Fail),結果作業系統就無法開機
Ans:請在POST畫面中進入EFI Shell去設定MegaRAID 9240-4i. 你可能會看到以下的訊息:
Some configured disks have been removed from your system, or are no longer accessible. Please check your cables and also ensure all disks are present. Press any key to continue, or 'C' to load the configuration utility.
建議您可以按任意鍵或是按"C"去確認RAID狀態,之後系統會再下一次開機時進入作業系統
NOTE. When MegaRAID 9240-4i enabled in legacy mode, the behavior is the same when RAID is degraded. You have to press any key or ‘C’ for.