szadow

Tinkerer

Comments

  • As Acer support has proven to be useless, I decided to do a repaste. I am pretty satisfied with the results. I have used Thermal Grizzly Kryonaut paste and here are my results. On default settings using Predator BiFrost normal mode, the temps stay in 76-77C and the RPMs rather not go above 3k, but the default fan curve is…
  • The thing though we have not shared what CPUs we have :) Mine is Ryzen 3900X, which is quite hot normally. 76C for that CPU in multicore test is good result (maybe would even pass prime95 torture test). 64C sounds better, but maybe for your CPU that is average. To be honest AIO cooling did not change that much when it…
  • Thanks, I will check the warranty terms and also predator den. I guess depending on the game, I would imagine in a lot of cases modern mid/high cards in 1080p will be limited by CPU, not being utlized 100% thus having lower temps, so in that regards resolution matters. As for the case, mine is quite small but I have also…
  • I think the resolution doesn't matter as long as FPS is not being limited by either FPS cap, VSync or CPU. I saw his review and disassembly video, as well as other reviews claiming that load temp is somewhere between 72-76C and GPU being nearly silent, depending on whether it's open air or in case etc. I was thinking this…
  • I actually had 2 fans on the bottom, but no matter whether they were intake or out, the thermal performance would be even a bit worse. I credit that to perhaps fans being to close to each other, causing some air turbulence. As a result of the testing I did, I have removed those fans. My resolution is 3440x1440@144Hz. I…
Avatar