slick1 New User

Comments

  • That works. Lenovo must either be using the same chip or perhaps the Winbond is a compatible chip? Does anyone know what chipset we're dealing with... as knowing that allows you to match the driver more easily. The Intel updater failed to find any updates for the hardware. It seems to be looking only at existing software…
  • The AHCI is an issue for the internal drive... not the external ones. USB's and external drives work fine. If you do the install on the original drive you are unlikely to run into the problem. You only run into the problem if the driver is missing or you accidentally switch into IDE mode (like when doing a BIOS update). I…
  • It's unlikely you will have to go back to Win7. :-)
  • These models are all very similar... so there's no reason to suppose you won't be able to get them to work? It's not unusual to be unable to find if your particular computer will work under Win10. Of all the upgrades I've done (lots) this one was one of the easiest. The AHCI issue is a common problem with many laptops and…
  • That seems to only work for normal DVD burners? Never seen a firmware upgrade for a laptop DVD/CD? Plus every other 5735 owner would be reporting the same problem if it was a firmware issue? :-)
  • The problem has almost certainly been there for a long time. I eventually got it to work... but only by using a TDK DVD burned at 2x... and leaving it in the DVD reader for a long time (went away and did something else)... which gave it plenty of time to recognise the disk. The TDK media is much darker (more AZO dye?) than…
  • This AHCI solution worked: http://www.tenforums.com/performance-maintenance/15006-attn-ssd-owners-enabling-ahci-mode-after-windows-10-installation.html 1. Run Command Prompt as Admin 2. Invoke a Safe Mode boot with the command: bcdedit /set {current} safeboot minimal 3. Restart the PC and enter your BIOS during bootup. 4.…
  • Forgot to mention that I have 2GB memory in the machine. However I'm not sure if that's necessary... as it seemed to be willing to upgrade to Win10 even before the memory upgrade. Cost $14 for the memory (Hynix 1333 DDR3 1.5V with 8 chips on the SODIMM). This machine is amazingly fussy about memory... as I tried a number…
  • I've got Win10 working on my Happy 2. However I'm not using the AHCI option but the IDE option on the hard drive settings in BIOS. I don't know if that matters or not. When I try using AHCI it crashes. Trying to fit an SSD at the moment... and not getting anywhere... probably because of the AHCI problem? Anyone know what…
Avatar