rezzin

Tinkerer

Comments

  • Okay so - update time! Firstly with taking the GPU apart - very easy, most of the screws are the same size apart from the 4 spring loaded screws and the ones that go onto the back of the case and the ones that go into the motherboard. Used Arctic MX6 paste, and after testing here are the results: Prior to repasting, fan…
  • Thanks again for the information. Yes the 80c I was referring too was the core temp according to MSI afterburner. I would say it got to that temp after about 80% utilisation so not heavy heavy gaming but definitely has a load on it. I decided to take apart the GPU and have a look at it, the thermal pads look OK, they are…
  • Thanks for the reply! So is it safe to assume that something isn't right with the GPU temps? I've got some Arctic MX-6 paste coming today so will take the GPU apart, re-paste and see what difference it makes. Then if it doesn't change anything I will go ahead and measure the thermal pads and replace those too. & Yeah I'll…
  • Thanks for the reply! So is it safe to assume that something isn't right with the GPU temps? I've got some Arctic MX-6 paste coming today so will take the GPU apart, re-paste and see what difference it makes. Then if it doesn't change anything I will go ahead and measure the thermal pads and replace those too. & Yeah I'll…
  • I'm referring to the Predator Orion 3000 desktop not the Laptop, also it's the GPU I'm having an issue with, I've already replaced the CPU fan and that is fine. Thanks
Avatar