petrosd2012 New User

Comments

  • I've Kuosed you all over the place. If it's not enough, let me know
  • To Acer-Cory, Acer Technician Not the same as the V5-571 is it? :-) There's no indication that your system wasn't using "Fast Start" (mine wasn't) which I suspect is part of the issue. There's no indication that your first boot device is Secure Boot Manager. The error message you got was no bootable drive/disk. The error I…
  • Extracting BIOS 2.17 and updating BIOS worked. Thank you for the suggestion. :-) Here's the steps I took to get the system bootable (and BIOS accessible via F2) System powered off. Insert USB System Recovery Drive (I used Windows 8.1 but it probably will work with a Windows 8.0 version) or Windows 8.0/8.1 Install DVD) and…
  • I did as you suggested (a good idea). I booted with Win8.1 and chose Repair and worked my way through the Command Prompt. I had downloaded and copied the 1.22 BIOS and 2.17 (UEFI/Windows) BIOS as recommended by Acer for this specific model. I tried them both. 2.17 gave an error "the command subset isn't present" (I forget…
  • I'm issueing a challenge -- especially to Acer Technicians. On a non-upgraded Windows 8.0 laptop with EUFI, go into the BIOS and change it to Legacy. Shut Down. Power on and press F2 repeatedly. What happens? Please don't comment unless you've actually done this. Please don't tell me what it should do. This is for people…
  • Acer-Cory wrote:The UEFI (which is a replacement for the BIOS we've all grown up) has legacy support, and that's what you've said you enabled. The OS won't load in legacy, but you would need to use legacy to boot USB drives, or DVDs, so that is why the option is there. I'm not sure why you can't get back into the BIOS, you…
  • You can't go to a command prompt if you can't load the OS PS. I know the various DOS commands. I was using them long before Windows. I knwo you think you know a lot, but you really don't. I'd appreciate if you go stroke your ego somewhere else. You're just not helping here. Thank you.
  • I know what a BIOS does. I was probably configuring BIOSes before you were born! :-) I know what it shoud do. That's not the problem. It's not doing it is the problem. Once again.... <sigh> IF you change the BIOS Setting from UEFI to Legacy when you restart the system you CANNOT get into the BIOS -- by pressing F2, or any…
  • PS. Lose the superior attitude as well. It's not helping. You might know what you're talking about but your 'advice' gets lost in the noise of your crowing. It might work on the minion crowd, but it's lost on me.
  • F12 won't work -- because it's not actually loading the BIOS. That's why F2 won't work. I've worked on hundreds of systems over 30 years and I've NEVER had one that can't go to the BIOS. Until this Acer. Any BIOS setup that requires the OS to load it is useless precisely because of situiations like this. As for unpacking…
  •  because the Boot Order under UEFI stays the same (Secure Boot OS) and you don't have one any more. It's a useless 'feature' of the Acer/UEFI BIOS Setup. The bottom line? You're screwed unless you install WIn8 from the Recovery Disks. Unsoldering the CMOS battery won't change a thing because that boot order is the default…
Avatar