paul3000

Tinkerer

Comments

  • I already had it from my Ryzen 5 5600 CPU. I used an aftermarket cooler with that CPU so I had it lying around. It’s the same CPU fan on most budget or mid range CPUs from AMD. The AMD Wraith cooler, it’s about $9 USD on Amazon. You do have to remove the little shroud around the fan for it to fit, but it’s just two small…
  • reviving and old thread. I replaced my CPU fan with a stock AMD fan. Used existing screws in current heatsink. Only modification was removing the AMD shroud which just has two small screws under the AMD branding and then pops off. Ran the CPU full throttle for a handful of minutes and didn’t notice much noise. The CPU fan…
  • I couldn’t find a 92mm round fan, that would likely work (and just use the included heat sink. That Alpine CPU cooler looks like it attaches via pushpin, I guess I’d just have to take the whole motherboard out to mount it.
  • Thanks. Posts weren’t exactly what I was looking for. I can confirm a normal 92x92mm fan will not just drop in as a replacement cpu fan. You could if you did some modifying of the fan but if it’s a square fan the corner will block the second ram slot. Not an ideal option.
Avatar