napalm New User

Comments

  • I ended up using a small spring that I cut with tin snips to an appropriate size. I glued the spring to the white push tab and then the button to the spring. Weatherstripping adhesive worked very well as it is rubbery/flexible. The F1 key is a tiny bit stiff compared to the rest due to the spring but it does work quite…
  • Your network would be protected by encryption (ie. WEP, WPA, WPA2, etc.). Did you attempt to key in the encryption key anew to ensure that it is correct? Can other computers connect to the same network without issue?
  • Imo you need to use the windows 8 system repair disk which will allow you to opt the command prompt. Then you need to fix the mbr on all partitions. I am assuming that your hdd still has 3 partitions from the original windows installaion that came with the computer. You need to fix mbr (using the command prompt) on all 3…
  • I figured out that the center of the plastic clip must have broke away as that should be one piece. Attempted to glue that plastic clip back together and mounted it on the keyboard but could not get the key to click into place. Since I do not care about replacing the F1 key in the future (Imo whole keyboard needs…
  • DId you ever create a system repair disk and/or usb drive? If not you can find one on the net for Windows 8 and use it to repair your system. You can also use the OS installation which should have an option to fix it while keeping old data. Regards.
  • Unplug the unit and take the battery out. Look in the slot where the battery goes and examine the connector. Does it look as though any of the blade terminals are touching? Imo it sounds as though you somehow caused damage to the connector whereas you should be able to see the apparent damage if any of those prongs are…
  • What OS are you using? I will assume it is Windows 7 or 8. Does the unit have a cd/dvd drive? With this post I will give instruction for using the USB port on the right side of the unit. You will need to run the OS recovery utility from a USB drive (formatted as NTFS) and navigate to its command prompt. Files from a…
  • Did your friend reinstall the OS recently to fix other issues? Perhaps one of the chipset drivers is not installed so make sure of that. In the drivers/support software list ensure you have the correct OS selected and click on Application. Attempt to download and install the WebCam Application. Regards.
Avatar