marra New User

Comments

  • copied the drivers from the download section to another USB disk, selected the Intel Chipset 9 series RAiD SATA driver and it again said "no driver" Any ideas would be very appreciated
  • I have removed the 2x 1TB disks that came with the Revo One Rl85, installed a Corsair Force 3 60GB drive and the BIOS sees it. However, when I boot from Windows 8 Install USB it gets as far as "Select the driver to install" "no devices drivers were found, make sure the installation media contains the correct drivers ..."…
  • Cheers, The BIOS does not seem to specify if it RAID 0 or 1. However, looking at the drive config it looks like RAID0. I am going to slip an SSD into the PC and load Windows 8.1 from a bootable USB, use the 1TB disks as separate storage. A little disappointed with the Doc's on the device, not too much info on the Acer site…
  • I have just performed USB restore & upgrade to Windows 10 leaving the BIOS setting to RAID only to find when I look in disk management I have a C,D,E & F. Partioned like 2 separate drives. Able to delete disk 2 partitions and have a full size 1TB (although both disks show boot & recovery partitions). If I set the disks to…
Avatar