ksonghasun

Tinkerer

Comments

  • I tried undervolting last night though I didn't want to. Intel's XTU was very easy to work with. I was able to get low to mid 80s versus mid 80s to low 90! I was a lot more comfortable with the temps. Today I re-pasted my CPU and GPU w/ Grizzly Kryonaut as well as installing Arctic 1.0mm thermal pads on the four memory…
  • I attempted undervolting last night, -150mV eventually froze and crashed after 30 minutes of gameplay. I found my sweet spot at -140mV, temps were good, 75-80degreesC, barely hit mid 80s. I re-pasted w/ the Grizzly Kryonaut (CPU and GPU) and applied new Arctic 1.0mm thermal pads on the four chips, that originally had pink…
  • I get mid 80s on high performance mode but it freaks me out when I see it consistency run at 88-91. That’s the only reason why I started running it on balanced. I’m still getting 40-50fps on high/ultra setting w/mods on GTAV running balanced. I pla on repasting one last time with Grizzly Kryo and Arctic pads on the four…
  • I didn’t expect the pink paste so I didn’t replace it with pads but instead enough mx-4 to contact the heat sink. Results weren’t too different. Not even better. Im running it on balanced now and im comfortable with it, stays under 55degreesC and i notice no different other than a tad slower. Ill be repasting the cpu ans…
  • I did exactly as you did with the same results. Pink paste was also replaced with Mx-4. Im no linger running it on ‘high performane’ but instead on acer balanced and Im comfortable with it. The videos and hiw tos out there dont specify whether they run their power settings on high performance or on balanced. Balanced…
  • My model doesn't have the easy access panels, it required me to remove the entire cover to access the CPU and GPU. Also, all videos I was able to find one YouTube have thermal pads on the memory chips. When I flipped the heat sink the first time, there was a thick pink paste on them, the CPU and GPU had a silver paste.
Avatar