cinoaz

Tinkerer

Some use Hot Glue Gun, I used little patches of velco. On the short length LEDs, a patch of velco at either end. On the long strip, one at either end and one in the middle. You can use tape, liquid cement, whatever you want. The bigger point is that there is no way for the LEDs to mount to the monitor out of the box and…

Not sure Acer is aware. I don't know for "SURE", but, this is how the ports react. Having done some software in the past it seems like a simple mixup, having an array that is 0 based or having an array starting with 1. Not having any information in the manual, online or anywhere on what the 4 connectors were numbered, I…

In case anyone ever comes back here, the solution is: FUBAR'd RGB Sense App has a software bug that doesn't index the ports on the monitor correctly. It's a 0 based indexing error. I think the CG monitor firmware refers to the ports as 1-4 wheras other monitors index into ports as 0-3. Whatever, it's a zero based index…

How do you get the lights to sync to sound

Since the lighting strips didn't come with adhesive, and lack,of any instruction, here's my swag. I didn't concern myself with the plugs, just treated the monitor plugs as a buss. I used my hot glue gun to mount them.

I found the fix, so, in case someone comes looking they will have it. My XFX 5700XT Thicc II has 4 outputs, from top to bottom are DP, DP, HDMI, DP. I assumed output would be numbered 1-4 from top to bottom as well. Well, not the case. In order for 4K @144hz to work, The Panel's DP #1 needs to be connected to your vid card…