Comments
-
That is a good question. Motherboard and or PSU to flimsy to take the extra power for the 10700k ? Bios to crippeled to acomodate extra overclock possibilities anyway ?
-
For a gaming system , the orion bios is a cruel joke. Forget about setting memory timings.
-
Hello, Yes, that is a good find , with the zotac bios i only get a 11940 score in Time Spy , that is low score for a 3070 RTX. So i might revert back to the Acer bios for now.
-
First , If it all goes south you might just end up with a expensive paperweight. No guarantees.Backing up the current bios : nvflash --save backup.rom
-
Don't forget to backup the original firmware. That way you should be able to Restore it if you need for warranty .
-
Since the PCB's are as good as identical i risked it and flashed my 3070 with then "Zotac Twin Edge" using nvflash.After that i used the tool from zotac to write the BAR supported firmware update Both procedures worked and it looks now i have a "Zotac/PC Partner" card.ALAS as you can see below no resizable bar on my…
-
i am dissapointed to that there is no video port on my MB also.And to add insult to injury, i just checked in my firmware, the build in GPU is set to disabled and there is no way to enable it. :s Predator 3000 P03 620
-
What we first need to be sure of is that we don't need a motherboard bios update. (We probably need one) Without that no Resisable BAR on any GPU
-
1) It reports the Subvendor as "PCPartner" in the GPU-Z utility. That is the chinese Umbrella corparation that also build the ZOTAC cards. Altough i dont see any brand on my card, so i consider it a nameless OEM. 2) Havent replaced mine case fans , but want to , they make a bit of an annoying howl at certain speeds. 3)…