abrogard

Tinkerer

Comments

  • Thanks for that. I'm getting a new power supply. Because the thing worked for a day I supposed all jumpers are where they should be but I just checked them and, yes, they are. This is a new board because the old one wouldn't switch on. I now see that there appears to be a blown capacitor on that old board. There is a row…
  • It has Win7 installed. I can't look in device manager because today it won't boot at all. The cpu fan starts up and runs fine. The case fan at the back twitches like it will start but doesn't, then twitches again, and again, and again... never starts, just keeps twitching. The monitor displays nothing. On the back panel a…
  • It says: SNID 64004378 ASPIRE E650 MMX 6 P/N AS.E6697.470HE All that's on the side cover.
  • Not stupid at all, I think. However it's not the answer, it seems. I have replaced it - since your question - and it hasn't improved matters. I'm looking for another D945 board on ebay right now. and p.s. I've been at the header recently, too, and failed to get anything out shorting the appropriate pins on it.
  • No, haven't touched the header. The plug is still in it. I've tried to short the green/white and the blue/white by touching two ends of a piece of wire onto the metal of the disconnected plug at the on/off switch. The metal that shows through the plastic at each wire's entry point therel. If you see what I mean. What…
  • I have marked this thread as solved so I suppose I should start a new one. Before I get a new switch I've tried to short out pins 6 and 8 on the old one and no matter what I do I get no response from the board. I say again the PSU seems okay according to my tester. And the external hard drive has its own power source but…
  • Thank you for that, Ace. Exactly what I wanted. You are a miracle worker. Thanks, too, for the link to the switch on eBay. regards, ab
  • Yes James, thank you. You are not speaking out of turn at all. What you suggest is precisely what I was referring to when I mentioned getting a board diagram if anyone has one or can just look at a board perhaps they have and tell me which of the wires I can connect together to start the machine? I am aware one only needs…
  • It has MG-47 written on it. If I could just get a board diagram I could perhaps identify which wires are the power wires and I could fasten some switch to them. There is a blue and white pair and a green and white pair. Maybe I could just try shorting combinations of them until I find which pair start it up? Or that might…
  • The first ten, ONLY ? That makes it a bit hard. The text on the side panel of the case says: E650 MMX5 SNID **** P/N AS.E6697.470HE W/O: 36003848 No ten digits there. Unless it's the P/N (Part number?) Inside the case there's a massive number: 2ZOT4-004-GP625027552800 (YT) That's all I know. Remember, this is Australia. We…
Avatar