Rambo23

Tinkerer

Comments

  • is there any way to mount a 6tb and above drive? I’m having trouble lining up the screw holes. At most I was only able to get 1-2 on the back . Tried using the side holes but they don’t line up either.
  • Thank you both for the responses. I think I ended up with a decent budget pc for now. I will upgrade the ram to 32gb. Do either of you have this actual pc to know about how to mount additional hdd. The hdd I have none of the screw holes line up with the mounts in the case. Also is there a good Acer customer support that…
  • Yea it’s weird I think all the F series have the 1660s. I don’t know if they sell the non F with the 1660s due to the block by acer. Just looked and it is only a 300watt. I also attached the screen shot of what acer had on the site which I ordered. I wasn’t happy with their response about it either
  • I will need to check again once I open it if there is an extra 4 pin. What’s weird is the specs for this build as per the Acer site had the 1660s . But when I received it it was not in the computer. It was there previously since the metal covers on the back of the case were missing. So I don’t even know where the power…
  • yea I figured since the 1070 uses the 8 pin it needed that extra power from a more powerful psu anyways. I think I read in another post that the tc-1760 was locked to either igu and or dedicated only. There isn’t an option to use two which maybe due to the psu being so low?? It won’t be used for gaming anyways mostly for…
  • thank you that diagram does help. However what is that 4 pin powering? Or is that from the psu to the board?
Avatar