PittAussie New User

Comments

  • Choose the option with the frame. It's only $8 more than the screen alone that was posted by someone else above. If you look at the 4th picture on that page you will see the small black plastic oval shaped around the edge of the frame. Those are all the plastic welds that would need cut off to replace just the screen.
  • The screen mounting frame is actually "melted" to the plastic of the bezel. To replace the screen the melted plastic welds would need to be cut away. You would then need some other method to secure the new screen. Basically, removing the screen requires destroying the mechanism that holds the screen in place. A much easier…
  • I know this is an older thread, but I am sure there are still plenty of people using this great device. I am going to try upgrading the SSD later this week. After doing a LOT of searching online, there are actually a couple of M.2 NVMe drives that are B & M keyed. So long as the connector supports both SATA (600MB/sec) and…
Avatar