LostGuru New User

Comments

  • Yeah. I figured it out. It was getting intermittent access to the drive because of the port being damaged (solder joint to the board). Unfortunately I broke a tiny part off of the board finding that out. I'm generally pretty good with laptops, I have fixed quite a few for friends, family and classmates. Things is, I don't…
  • I did. Last night after my last reply it installed. But it runs super slow. A start up time of over 5 minutes for an SSD machine? There is something wrong hardware wise. The drive literally disapeared after being found by diskpart. I think at this point I need to address that. Plus even now that it is "installed" its still…
  • Well, I think I might be starting to understand. The disk showed up in diskpart, then disapeared mid cleanup. Then when I restarted diskpart the disk was there again. I'm thinking its a bad connection. The sata bridge might have a damaged solder joint or something. If the drive is intermittently disconnecting itself that…
  • I got the bios to update, it switched itself back to UEFI. Its been trying to create the partitions for about 15 mins now. I'll see if I can find the programs mentioned in that other thread. This is really weord though, its a brand new drive. I didn't havethis trouble with the other laptop, or this one when I originally…
  • It wouldnt install without going into legacy. Wouldn't even try. I got windows installed and booting. It's still not acting right though. Things are taking way too long. I will update the bios and see if that helps. It took about 6 hours to force windows onto the disk. I had to install it over top of itself and remove the…
  • I think I may have figured it out. There is a botton on the motherboard that I know got pressed in the rebuild. I pressed it trying to figure out if it was in fact a button. I don't know what it does. I do know that setting the bios back to default itself could have changed it back to UEFI. I reset it to leagacy mode and…
Avatar