JTav13

Tinkerer

Comments

  • Hi guys, I just tried the battery reset a few times. Unfortunately is did not resolve the problem. I will try the battery removal here in a bit and try to short. Thanks again for all of the help. Jay
  • I just pressed F-9 in BIOS and it took me to "Setup Configuration" Load default configuration now? Y or N. I choose Yes and think it may have reset some things we previously changed. It still did not offer a Legacy mode. I also tried to reboot to USB after F-9/F-10 and still getting sent back to: Default boot device…
  • Hi Jack, I looked for the Legacy option in BIOS Boot Tab. Only option is still UEFI. Thank you
  • Hi Jack, I disconnected the HDD and tried to boot from USB again. Still taking me back to this screen: Default boot device missing or boot failed. Insert recovery media and hit any key Then select 'Boot Manager' to choose a new boot device or to boot recovery media [ok] I tried two different USB drives with Windows 10…
  • Hi Jack, I disconnected the HDD and tried to boot from the USB drive. It is still going to: Default boot device missing or boot failed. Insert recovery media and hit any key Then select 'Boot Manager' to choose a new boot device or to boot recovery media [ok] I tried both USB ports on the laptop and both recovery USB's…
  • I think I may have mentioned earlier that my USB drive was Sandisk. Was wrong, it's Kingston if that matters. Thanks
  • Hi Jack, I tried a second USB drive with the windows 10 recovery. It took me back to: Default boot device missing or boot failed. Insert recovery media and hit any key Then select 'Boot Manager' to choose a new boot device or to boot recovery media [ok] and has me in the same loop. On a possible positive note, when I first…
  • Hi Jack, I am using a 16GB Sandisk USB drive which I believe is 2.0 though not 100%. It was purchased about 5-6 years ago. I tried it in the laptops USB 3.0 port (blue) and the USB 2.0 port and neither was responsive. I didnt think I had any other 8GB+ USB drives but found one (same model/brand as one I already tried)…
  • Hi Jack, I followed everything from above, step by step. Unfortunately after selecting the USB drive (#7 above) with the windows recovery, it went directly to the following option again: Default boot device missing or boot failed. Insert recovery media and hit any key Then select 'Boot Manager' to choose a new boot device…
  • Hi Jack, I tried this and it did take me straight to the boot menu (#1 was HDD and #2 was USB). I choose USB and then it went directly to: Default boot device missing or boot failed. Insert recovery media and hit any key Then select 'Boot Manager' to choose a new boot device or to boot recovery media [ok] I tried it a few…
  • Hi Jack, I downloaded the needed info and made a Win 10 install recovery USB. I started the laptop via ALT+F10 and then when I arrived at the below screen: Default boot device missing or boot failed. Insert recovery media and hit any key Then select 'Boot Manager' to choose a new boot device or to boot recovery media [ok]…
  • Thank you for the follow up. I just the ALT+F10 startup again and it is taking me straight to: Default boot device missing or boot failed. Insert recovery media and hit any key Then select 'Boot Manager' to choose a new boot device or to boot recovery media [ok] The Acer logo briefly pops up for split second before. Any…
  • Thank you for the response. Sorry, thought I posted pictures on original message but noticed now that the pics did not post. The F-12 menu, D2D Recovery are both checked and the HDD can be seen in the BIOS. Thank you, Jay
  • pics Edited the content to hide sensitive information Acer-Samuel
Avatar