Halicron New User

Comments

  • Well, I finally got a new DP cable, and lo and behold-- my OC issues are fixed. I'm stable at 90hz. Thanks everyone for the help. My recommendation is DON'T BUY A DISCOUNT CABLE! Get one with good reviews that is clearly rated for 4K.
  • Tried a factory reset, but no dice-- still getting the no signal error when I try to set my refresh rate over 60 in the NVCP or Windows Display. This is the cable I'm using: http://smile.amazon.com/gp/product/B00T0Z44V2?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00> 
  • Verify that your DP cable is 1.2 compliant. I bought a 1.1 cable that wasn't. Try hooking up an HDMI and a DP cable, and then you can use HDMI to configure the DP cable-- set the display to 1080p at 60hz on both, then mess around from there to see if it clicks.
  • I did try this, yes. Same issue- screen goes blank, flashes 'No Signal', then the display timer resets and it snaps back to 60hz.
Avatar