GiZerod

Tinkerer

Comments

  • USB, WiFi, Bluetooth - possibly even NFC - Take your pick. It all depends on your printer, OS, and technical ability. Without more detailed info, that's about as helpful as i can be...
  • ok, let me try this again... Hi All- Sorry i've been in <LURK> mode for a while. I'm sure you all can identify with getting so busy you can't catch your breath... My SA12 did NOT come with a 3G/4G cellular modem, and i did not see a SIM card slot - but that doesn't mean that it wasn't there. I just wasn't looking for one.…
  • I started spreading the trim from the back-plate on the side of the SA12, near the power port, but i think that as long as you start at the middle on either side, you should be ok. I would avoid starting at the top or bottom, because the trim appears to be more fragile near the webcam and speaker slits, and the bottom was…
  • i completely forgot about the copper heat spreader on the motherboard. you will need to remove that in order to access the SSD. It's attached with a bunch of small, silver screws, just remove them all (use a magnetic screw driver to make it easier on yourself) and then gently lift the spreader from one side until the…
  • Sorry about my lack of response on this thread. I've been beyond neck-deep in work craziness for the past few weeks, and its all coming to a head in the next few days (enormous project going live, AWS migrations, bla bla bla). There aren't any ways to adapt a SATA-based, B-keyed m.2 slot to an NVMe-based M-Keyed m.2 slot -…
  • Yeah, the 960 EVO or better yet, the 960 Pro series blow SATA-based SSD's right out of the water - hence my desire to run an NVMe SSD. What i haven't figured out yet is if the SA12 will support a PCIe x2 link on the B-keyed slot. Technically, B-Keyed m.2 cards can support a PCIe-x2 link - which would still be MUCH faster…
  • I too have wanted to upgrade my SA12's SSD to something both faster and bigger. After following this and other threads for a few months and seeing that no one had done a tear-down, I decided to commit and started figuring out how to take it apart myself. I was able to do it, and about 2 hours later, i was looking at the…
Avatar