FRANCO64

Tinkerer

Comments

  • Thnaks. I created the Win 10 DVD with another computer.
  • No worries Jack. It was a very old laptop and I bought it pre-owned. I took the chance to buy a new one. Thanks a lot for your efforts!
  • Morning! I believe the problems reamain that at power on the screen is not operative. Before the BIOS was working and starting the computer (even if in an "invisible" way). Now, leaving the BIOS totally unpowered for a while, maybe at the start up the computer needs some input but we do not know and remains there for ever…
  • The laptop is dead. After switch on no leds blinking, no effects touching the keyboard, only the fan is working. Any suggestion on how to re-write the BIOS?
  • I replaced the coin cell. It is a CR2032 and I had some at home. After I replaced the battery ... DISASTER. Now the screen remains blank and the XP never starts. No more blinking of the caps and HDD leds. Maybe the bios got cancelled while I removed the power and changed the battery? Any idea of what I shall do now?
  • I found the battery. It is under the keyboard. I remeoved it and measured its voltage. Even if the date code il 1993 it still provides 2.9Volts!!! However, without the battery and even after shortcircuiting the battery plug on the motherboard the Laptop behaves exactly the same ...
  • IIn addition ... if the laptop finally loads XP, it should mean that the BIOS works and "manages" the operatons until the OS is started. Why should it be unpowered or short circuited? How could it work if it is not powered? On the other hand, does exist in the BIOS a commando that keeps the screeon black during power on?…
  • Do you have somewhere a procedure to remove the bottom cover that I may read? This seems not easy... 
  • Morning! If I restart Win Xp and I press F2 as you suggested I still get the continuous beeping :( 
  • I just did also this one. Without the HDD and with the Win 10 DVD inside the DVD reader, I still have the black screen from power on and at a certain point I see the HDD led blinking together with the DVD reader "noise", telling me that the Win 10 DVD is under reading. It continues reading the DVD, pausing, reading,…
  • Morning guys ... here is 9:00am since I am in Italy. If I tap the F2 just after the HHD leds blink i still get the beeps and no starting of XP. 
  • Done. It starts beeping at the second/third tap. The point is that if you get to the beeping, then the HDD led blinks only for a couple of times but windows xp never starts. At that point thescreen remains black and you may only switch off the laptop by pressing the power switch
  • Done. After 2 or more (less if a start tapping later) taps on the F2 it starts beeping at any new press of F2 (or any other key if I try pressing it). If it may help... After switch'on on the leds at the bottom of the display: bulb lamp goes on immediately, afterwards caps lock and numpad indicators blink, then the HDD…
  • Yes. Nominally
  • Ciao! No choice screen. Only the black screen until windows XP starts. Is it possible that at power on the screen is set to black (zero illumination or do)? I have also tried yo connect an external screen but did not work ...
  • No changes unfortunately ...
  • Thanks. I tried. It does the same. If I push the "m" key continuosly at (and/or before) switching on, thye laptos starts beeping until I un-press the key. No changes... However, actually I am not interested to enter in the BIOS; I wanna change the OS from XP to Windows 10. I have a DVD to install Win10 but I am not able to…
  • Thanks for the answer.... I did it already. The notebook starts to beep continuosly until I leave (unpress) the F2 key and after that does not start at all. I need to switch off again with the power button to resume it
Avatar