Deserys

Tinkerer

Comments

  • The only thing that helped me, is reinstalling Windows. After that the wakeup works normal. Windwos installed on M.2 drive resolved whining coils.
  • I live and currently i am in Poland. I bought that PC in Poland, EU, my manufacturer warranty is 2 year door2door by default - but i have made modification to the lid so my laptop could work for me when i was REALLY needing it -> i guess that my warranty is voided. Source:…
  • Sorry for necroposting, but i have to leave something useful. If you are having problems with this, then follow this guide and set fans to AUTO: 1: Download and install RWEverything (it is free). 2: Open the App, and go to EC (embedded controller) - located at top middle. All this hex numbers constitute the EC, whenever…
  • I have sent You a private message in which I ask for NBFC profile for this machine ;) Links are dead, and I want to gather all knowledge about this machine so people will have easier to tinker with it :smiley: If you don’t have that profile, could you help me with creating one? I want to help our community :3
  • Can you describe when your temps go high? And how high? Because i run 1.06 Bios with stock paste and laptop runs outstandingly well. Room temp is no higher then 22C tho.
  • Set power plan for balanced. Fans should always work auto... If you have HDD -> then maybe HDD is making the noise. I know that my HGST is making HUGE noise eveytime. Need to swap it. I play BO2 too. I have everything maxed. Fans spin normal on balanced mode. But HDD is loud as angry bulldog on cocaine while eating raw and…
  • Slow HDD. This is the cause of the stuttering. Get quality 7200 or change for SSD.
  • If you have HDD then lagging system is no surprise. if you have SSD drive inside and it still lags then you have some malware/junk apps/you reconfigured Windows wrong by mistake. Post s'y what exactly Vx15 you have. What Device ménagère shows about Hard Drive and storage. 
  • Hi! You see, when you put pressure to the screen frame made out ignore plastic, you put pressure also to the screen itself, because screen frame touches the screen. Try not to putting the pressure at the very top of the frame, in the corners. *cough*(it is possible to use fingernail and pry and disconnect the front frame…
Avatar