Davin

Tinkerer

Comments

  • Hi @Jack22 and @AnhEZ28 Thanks for this, looking at your post made me realise both Jack and I missed the 'number of DIMM sockets = none' So that gives me the answer, Thank you all for your help :-) The SP513-53N is still a great laptop, I was just hoping to future proof it a little :-)
  • Hi both @Jack22 and @AnhEZ28 fyi I had a look at this article and got this C:\Windows\System32>wmic MemoryChip get BankLabel, DeviceLocator, Capacity BankLabel Capacity DeviceLocator BANK 0 4294967296 ChannelA-DIMM0 BANK 2 4294967296 ChannelB-DIMM0 C:\Windows\System32> so it looks like I have 2 x 4GB DIMMs (or SODIMMS) the…
  • Hi Hi @AnhEZ28 Did you have a typo and mean to say 'can't do RAM upgrade for this model?' Thanks for helping :-)
  • Thanks @Jack22 is there a way to see via Win11 or an Acer tool which is actually installed? Also do you by chance have any videos of the installation process? I have seen post saying the RAM is hardwired on this model? Thanks again
  • Hi all, The problem is back and now it won't power up even after repeated attempts at resetting it as described above. Can anyone explain what is actually causing the issue? Is it a physical button issue, or broken link/connection? any links to diagrams or videos would be useful. P.s. I have a looked and will continue to…
  • So after leaving it powered down, with the battery in but no mains, it started yesterday morning. I then plugged the mains in and it started a few times during the day. I then left it plugged into the mains with the battery in and switched off over night (this is what I normally do) and it started this morning ! and has…
  • Hi @Jack22 Thanks for the reply I tried what you suggested without plugging the battery back in so just mains and it worked, I even tried powering down and back up and it still worked :-) This morning I tried to power up and hit the same issue, mains had been in with no battery. gave your solution a couple of goes and…
  • My average v5-571 doesn't have a reset hole. I've tried unplugging and removing the battery, then holding the power button for 10 to 60 minutes. After this , plugging in or using battery it still doesn't start. When trying the blue light flashes and clicks and the goes solid for a few seconds then nothing. what do you…
Avatar