Comments
-
I have tried multiple times wiping the drive and converting It to mbr using minitool partitioner. change bios to legacy, then boot from the USB in legacy mode to install windows. Selecting the second option to wipe the drive and have a clean install it will take its time loading to 100% then new error out after 7min of…
-
Oh, and thank you all very much for taking then time to try and help me through this problem. Its very appreciated :)
-
@egydiocoelho ive disabled "secure boot" and tried restarting it with and without the hdd installed. Urfi still won't show the ssd and attempting to start it it says no bootable drive Legacy mode still won't boot either
-
@egydiocoelho secure boot is set to "enabled" I don't be know how to change it though as I cannot scroll and select it's to change it. Is there a setting that "unlocks" the bios and allows me to change it? lots of things I can change. (They are in blue text) but then there are things I can only view in grey text Also I've…
-
@sri369 when attempting to boot in legacy mode from the ssd it goes to a DOS looking screen where it tells me "media test failure,check cable" "no bootable device--insert boot disk and press any key" though it is detected in the bios screen in legacy mode and set to the first boot position would this computer need a bios…
-
@sri369 I have tried Macrium's free clone option. It states "the target disk had an incomparable sector size for this operation" minitool said the same thing, and Samsung software won't even say it's there. @@egydiocoelho I have tried what is in the video. It loads windows on the ssd from the USB, but the ssd will not boot…
-
2017 Acer aspire a515-51-59dp laptop i5 7200u, 12gig ram 1tb wd hdd (15% used) hello, I have been attempting to install a Samsung 970 Evo plus 500tb in my wife's laptop and have had no luck. (very little experience) once installed the computer recognizes the drive and runs on the windows nvme drivers. I can modify…