Acreguy Troubleshooter

Comments

  • Windows update - problem solved. I went to the MS site and downloaded their Windows Updater app and it installed everything in about 1/2 hour. Good to go! Thanks all!
  • No worries, tttt. Thanks again for your help. Next time, I'll read your instructions more carefully. The new Samsung 870 EVO drive is much faster than the original drive that came with my Acer. My next issue is to get the Windows update to work. There's one update sitting there and I've tried every suggestion on the net to…
  • Okay, it worked everyone! I didn't read tttt's original instructions closely enough about using a spare drive (duh!!!), probably as the result of having only one birthday but too many subsequent "birthday parties." I just finished extending the Primary Partition volume using the Disk Management tool. I had to delete the…
  • Could my problem be that my image backup and new desired C drive are the same physical drive? It sounds like tttt wnated me to backup on one drive and then restore that drive to my new C drive. I have two more SSDs. I have a 1TB drive that I could back up to. Then, do I restore Windows to my new C drive 870 EVO from the…
  • Here’s the verdict. I still can’t get the new drive to boot Windows. Since I couldn’t create a recovery USB in Windows, I was forced to create an image backup and recovery USB in Macrium. After that, here’s what I did: * Powered down and removed the old C drive. * The new drive with the backup was already connected via a…
  • Okay, it worked! I'm now thinking that I can use tttt's method but leave the USB drive plugged in after I remove the original C drive and during the reboot. That way the recovery disk should boot without having to go through the blue screen nonsense, which to this point has never worked. Agreed? Thanks...
  • Hi brummyfan2. I have Macrium installed I'll give it a try. I just read that the USB drive must be at least 4GB and formatted as NTFS. Windows will reformat it as FAT32 but that's the way they want it. Many thanks. I'll report back... - Lee
  • Well, I've run into my first snag. I tried to create a Recovery disk on a USB drive but I got the error message, "We can't create a recovery drive on this PC. Some required files are missing.” So, I tried just removing the C drive as per your suggestion. I arrived at the blue screen and tried selecting Recovery or some…
  • Hi tttt, Thanks. I will use the Windows Imaging software. I've used it before and it worked fine. I just formatted the new 870 EVO disk that had the clone on it and am ready to go to work. I'll report back. Thanks again!
  • Thanks, tttt. I do have three additional SATA ports with which to plug in three other SSDs. So there's no shortage of drives. I thought of trying an image backup instead of a clone but wasn't sure. Therefore, based on your instructions, I can: * Shut down the PC. * Attach a spare SSD drive to one of the free SATA ports. *…
  • Thanks for chiming in, guys. After a successful clone to the new SSD, I didn’t remove the M.2 SSD. The computer booted okay but both drives showed up in Explorer, as expected. I'm really not sure which Windows version booted. I suspect it was from the M.2 SSD. I then tried removing the M.2 SSD, rebooted, but I couldn’t get…
  • Further to my question, I would like to set the BIOS to boot (or shall I say "bypass") the M.2 NVMe SSD that is attached to the motherboard and use my cloned SSD as my C drive instead. Is there a way to do this or am I stuck using the grossly undersized M.2 NVMe SSD permanently? I sure hope not. This computer cost me…
  • Yes, thank you George. It seems no one has commented but at least the post is there. I couldn't find it anywhere. I tried all the options in my profile icon. 
  • Rudy, are you suggesting the monitor's software is corrupted? Never thought of that. It only happens to my main monitor, never the second one. They're both identical. Question about your instructions: "Press and hold the power button for 30-40 seconds" Do I keep the button pressed while plugging it in? I would think that's…
  • Glad you posted this problem, DeBedenHasen! I get this every few days too. I'm using two ViewSonic monitors, which have run flawlessly for 10 years on a prior system. I think only Monitor 1 goes blank - not sure about that. It shouldn't be happening at all. There is no damage, no sound, no data loss. Anyone know why this…
Avatar